Twisted Wedge heads, custom cam, hurricane intake, Probe pistons...
#1
Twisted Wedge heads, custom cam, hurricane intake, Probe pistons...
I have a set of NIB TFS Twisted Wedge heads for sale. These ARE NOT the normal heads that you would buy from Summit or Jegs. I bought them from the VERY well known camshaft designer Jay allen from Camshaft Innovations. He installed Ferrea 6000 stainless steel valves, custom Comp Cams springs that are matched to the cam I had ground from him and he also milled them to 58cc and did a competition bowl job to them. They cost me $1664 shipped to my door. The Professional Products Hurricane intake is a copy of the single plane Edelbrock Vic. Jr. I had it port matched to a Fel-Pro 1262 gasket and had all of the casting flash removed. I painted and cured it with VHT flat aluminum paint. The pistons are made by Probe. They are flat tops with a -3cc valve cut for TFS heads. They are part #14844. Here is a link for them. http://www.coasthigh.com/product-p/14844.htm
The cam is a custom hydraulic roller that was ground from billet steel. Here are the specs...
Cam Specs....
265/276 at .006"
.568/.566
110 lobe
6800rpm shift point
I have the cam card saved in my email and would happily email it to you if you are interested. It was designed for a 306, TFS heads, Vic Jr intake, and 6800 rpm.
If you have any more questions just ask.
I paid !664 for the heads, $400 for the cam, and $480ish for the pistons. These are starting asking prices only. ALL ITEMS ARE NIB EXCEPT FOR THE HURRICANE INTAKE. It is the ONLY used item. All prices are negotiable....
TFS heads - $1400 shipped
Cam- $325 shipped
Pistons- $425 shipped
Intake - $130 shipped
http://i4.photobucket.com/albums/y126/68_stang/043.jpg
http://i4.photobucket.com/albums/y126/68_stang/045.jpg
http://i4.photobucket.com/albums/y126/68_stang/046.jpg
http://i4.photobucket.com/albums/y126/68_stang/047.jpg
http://i4.photobucket.com/albums/y126/68_stang/048.jpg
http://i4.photobucket.com/albums/y126/68_stang/049.jpg
http://i4.photobucket.com/albums/y126/68_stang/050.jpg
http://i4.photobucket.com/albums/y126/68_stang/052.jpg
http://i4.photobucket.com/albums/y126/68_stang/053.jpg
The cam is a custom hydraulic roller that was ground from billet steel. Here are the specs...
Cam Specs....
265/276 at .006"
.568/.566
110 lobe
6800rpm shift point
I have the cam card saved in my email and would happily email it to you if you are interested. It was designed for a 306, TFS heads, Vic Jr intake, and 6800 rpm.
If you have any more questions just ask.
I paid !664 for the heads, $400 for the cam, and $480ish for the pistons. These are starting asking prices only. ALL ITEMS ARE NIB EXCEPT FOR THE HURRICANE INTAKE. It is the ONLY used item. All prices are negotiable....
TFS heads - $1400 shipped
Cam- $325 shipped
Pistons- $425 shipped
Intake - $130 shipped
http://i4.photobucket.com/albums/y126/68_stang/043.jpg
http://i4.photobucket.com/albums/y126/68_stang/045.jpg
http://i4.photobucket.com/albums/y126/68_stang/046.jpg
http://i4.photobucket.com/albums/y126/68_stang/047.jpg
http://i4.photobucket.com/albums/y126/68_stang/048.jpg
http://i4.photobucket.com/albums/y126/68_stang/049.jpg
http://i4.photobucket.com/albums/y126/68_stang/050.jpg
http://i4.photobucket.com/albums/y126/68_stang/052.jpg
http://i4.photobucket.com/albums/y126/68_stang/053.jpg
#2
Say big guy, What's up with the sell. i know you just got everything. PM me and tell me whats up.
Big Chris
Big Chris
#4
Half a pack of oil soak pads and a bag of Skittles?
I'll check with my guys in DeRidder and see if they are interested in the stuff.
I'll check with my guys in DeRidder and see if they are interested in the stuff.
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM