General Tech Ask model specific questions in the appropriate category below. All other general questions within.
Sponsored by:
Sponsored by: DashLynx

CD Error on Mach 460 cd-changer

Thread Tools
 
Search this Thread
 
Old 07-03-2007, 03:02 PM
  #21  
Spoutz
 
Spoutz's Avatar
 
Join Date: Apr 2007
Location:
Posts: 12
Default RE: CD Error on Mach 460 cd-changer

i fixed mine after i replaced it. i can sell it to you for a fraction of a new or refurb. a cd was jammed so i replaced it then cleared it out. i can help you. e mail me
Spoutz is offline  
Old 07-03-2007, 03:37 PM
  #22  
shadowfoxx
3rd Gear Member
 
shadowfoxx's Avatar
 
Join Date: Apr 2006
Location: Florida
Posts: 628
Default RE: CD Error on Mach 460 cd-changer

ORIGINAL: Augy

Well, I decided to take it out again and REALLY take it apart this time. I messed with all sorts of stuff I shouldn't have and pulled a few things out that seemed a bit foreign. Lo and behold, when I put it back in it WORKED. I'm tempering my enthusiasm a bit because I don't know how long it will last but it's the first time I've heard the sound system really shine (radio sucks). Sounds pretty darn good for factory. So, to those reading this thread with similar issues...don't give up.
yeah.. the cd error on our cars are VERY common.. they are a piece of junk.. speaking from experience: for some reason pulling the negative cable off the battery alone does not always fix the issue.. if this happens to you again disconnect both battery cables for about 10 seconds then put them back on .. that has always fixed the issue with me.... at least until it starts to flake out again..
or

just replace the factory unit with something better.
shadowfoxx is offline  
Old 04-08-2014, 05:05 PM
  #23  
c5zee
 
c5zee's Avatar
 
Join Date: Apr 2014
Location: Kanuckistan
Posts: 2
Default wooohoo thanks MustangMike2001

Originally Posted by MustangMike2001
Radio fuses are#27 (25A) and #32 (15A).
Thanks MustangMike2001 , bought the car and cd's jammed inside, pulled the fuses and was able to get out the cd's! I didn't have a manual so that really helped... my #27 fuse ended up being a 20amp but it was the right fuse none-the-less. Signed up here just to post this... good luck with the cd changers.
c5zee is offline  
Old 04-08-2014, 05:56 PM
  #24  
GTgeezer
1st Gear Member
 
GTgeezer's Avatar
 
Join Date: Dec 2013
Location: New Jersey
Posts: 128
Default

Mine did it and it was a cd stuck in opening just behind door which I was able to dislodge with another cd. this happened while unloading cd's and I found I had better luck if you hold the load button (long press) which is auto load and no problems.
GTgeezer is offline  
Old 07-07-2016, 08:28 PM
  #25  
zachbiery
 
zachbiery's Avatar
 
Join Date: Jul 2016
Location: Ohio
Posts: 1
Default Simple Solution

Originally Posted by MustangMike2001
This isa real common problem. I used to be able to get mine going again after a "cd error" by pulling the fuse to reset it but eventually nothing would get it working again. The in dash changers are junk. It will have to be replaced.
3 easy steps. Press CD, press scan, press 1. This is the official Ford reset process.
zachbiery is offline  
Old 07-13-2016, 08:35 AM
  #26  
fastbackford351
Foghorn Leghorn
 
fastbackford351's Avatar
 
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
Default

Originally Posted by zachbiery
3 easy steps. Press CD, press scan, press 1. This is the official Ford reset process.
*perk*?

I'm writing this down in my shop manual. Thanks for the information.
fastbackford351 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrtrodonet
V6 (1994-2004) Mustangs
3
09-19-2020 03:12 PM
TCStangerv6
Street/Strip
12
10-11-2015 05:57 PM
jrrhd73must
Classic Mustang General Discussion
2
10-02-2015 09:17 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM



Quick Reply: CD Error on Mach 460 cd-changer



All times are GMT -5. The time now is 10:21 PM.