Where do I start?
#1
Where do I start?
Have a 64 1/2 coupe that I am trying to save and also get some practice on.
It needs all new floors from the drivers feet area to the tail light panel and all new frame rails. I have all the new pieces to do this project, but am really lost as to what has to be done first . Any other info that you can give me would be greatly appreciated.
I was given this car and all new parts, and would really like to save it for sentimental reasons.
Thanks[sm=feedback.gif]
[IMG]local://upfiles/45496/06E3DE21F6C940C6BA3D3B5F3FF8B0F4.jpg[/IMG]
It needs all new floors from the drivers feet area to the tail light panel and all new frame rails. I have all the new pieces to do this project, but am really lost as to what has to be done first . Any other info that you can give me would be greatly appreciated.
I was given this car and all new parts, and would really like to save it for sentimental reasons.
Thanks[sm=feedback.gif]
[IMG]local://upfiles/45496/06E3DE21F6C940C6BA3D3B5F3FF8B0F4.jpg[/IMG]
#2
RE: Where do I start?
I would first replace the frame rails and than install the floor pans and just work from there, I would also try to sandblast out all of the rust on parts you don't have to replace to keep it from spreading
Thread
Thread Starter
Forum
Replies
Last Post
dalefrancis88
5.0L General Discussion
2
09-11-2015 07:15 AM