OnDemand 5 - Repair help for you.
02-04-2009, 10:38 PM
#21
2nd Gear Member
Thread Starter
Join Date: Nov 2008
Location: NJ
Posts: 236
ok I have a question I have a 95 gt 5.0 HO and I am looking to put a 94 to 97 5.8w roller motor in it can I use everything off my 5.0( intake set up, all front accessories and use the same oil pan and mounts just have to replace oil pump off the 5.8 to the 5.0 set up)
02-07-2009, 01:09 PM
#22
Join Date: Feb 2009
Location: MI
Posts: 9
Hey I just joined the forum and saw your posting Juno. I've got a '99 Mustang Convertible. I'm wondering if you have repair info on the rear defogger. Mine quit working. Checked the fuses and they're fine and the button lights up. But the window will not defog. Any help would be great.
Last edited by mustang35; 02-07-2009 at 01:22 PM.
02-07-2009, 02:42 PM
#23
2nd Gear Member
Thread Starter
Join Date: Nov 2008
Location: NJ
Posts: 236
Hey I just joined the forum and saw your posting Juno. I've got a '99 Mustang Convertible. I'm wondering if you have repair info on the rear defogger. Mine quit working. Checked the fuses and they're fine and the button lights up. But the window will not defog. Any help would be great.
Both are on the same SWITCH?
02-07-2009, 03:42 PM
#24
Join Date: Feb 2009
Location: MI
Posts: 9
02-07-2009, 04:45 PM
#26
Join Date: Feb 2009
Location: MI
Posts: 9
I'll take the wiring diagram that you have. Thanks for the help. I'll let you know what I find out.
02-16-2009, 04:33 PM
#28
Join Date: Nov 2008
Location: Concord, CA
Posts: 43
A/C Vacuum Line Diagram?
Hey Juno, you were such a fantastic help the last time on programming my remotes, I'm BAAAAACKKKK. Do you have a diagram for a 98 stang V6 3.8 A/C vacuum lines, or the vacuum distribution block? Anything on vaccuum lines in the engine compartment if the above 2 topics come up short. Dude, once again, you are the MAN! Thanks!
