1V carburetor rebuild
#1
1V carburetor rebuild
I'm going to be rebuilding the original 1V Ford carburetor on my early 65 with a 6 cylinder 170 ci. engine. I ordered the kit, bit I'd like to get an idea of how long this will take and difficulty level from someone who has done it and also if any special tools are required so I can get them before I start. I have a general repair manual, but if there are any good write-ups or books, I would appreciate that information if anyone has it. Thanks in advance. I'm very appreciative of the excellent help available on this forum. Great people!
Regards,
Gregg
Regards,
Gregg
#2
Is this your first carb rebuild? If you have all the necessary tools and "good" instructions you should be able to do it in a few hours. Unless you need to soak parts overnight in solvent to remove gum & varnish on them.
#3
Originally Posted by [I
GreyStang;6881194]Is this your first carb rebuild? If you have all the necessary tools and "good" instructions you should be able to do it in a few hours. Unless you need to soak parts overnight in solvent to remove gum & varnish on them[/I].
Gregg
Thread
Thread Starter
Forum
Replies
Last Post
170, 1965, 1965 mustang, 1v, 65, carburetor, ci, cylinder, ford, kit, mustang, original, rebuild, reduilding, repair