Jumper on Back of Instrument Cluster
05-16-2013, 12:16 PM
#1
3rd Gear Member
Thread Starter
Join Date: Oct 2006
Location: Virginia
Posts: 889
Jumper on Back of Instrument Cluster
There was a jumper wire on the back of the instrument cluster of my 68 Stang convertible.
It reads: FOMOCO C8ZB 3E645A H 5X FOMOCO. It's a yellow wire with a black stripe. It has one male and one female end. What is it for? BEFORE YOU ASK......I took it off a couple years ago and NO I don't remember what it was connected to. YES I know that was stupid but it is what it is. Can anyone tell me what it might have been used for? Thanks! BTW, my gauges appear to be working fine except for the bouncy speedometer needle. I don't have a tachometer or clock or A/C.
It reads: FOMOCO C8ZB 3E645A H 5X FOMOCO. It's a yellow wire with a black stripe. It has one male and one female end. What is it for? BEFORE YOU ASK......I took it off a couple years ago and NO I don't remember what it was connected to. YES I know that was stupid but it is what it is. Can anyone tell me what it might have been used for? Thanks! BTW, my gauges appear to be working fine except for the bouncy speedometer needle. I don't have a tachometer or clock or A/C.
Last edited by unit91; 05-16-2013 at 12:19 PM. Reason: more info
Thread
Thread Starter
Forum
Replies
Last Post