Conveyor belt problem... I dont know how to fix.. -

Go Back > Ford Mustang Tech > General Tech

General Tech Ask model specific questions in the appropriate category below. All other general questions within.
Sponsored by NewTakeOff

Conveyor belt problem... I dont know how to fix..

Thread Tools Search this Thread
Old 05-24-2014, 11:48 PM   #1
Join Date: Aug 2013
Vehicle: 2010 Mustang v6
Location: Texas
Posts: 14
Default Conveyor belt problem... I dont know how to fix..

I drive a 2010 v6 mustang and recently my car has been making these weird, deep "tic" noises. So I opened my hood and I see that in my conveyor belt system one cylinder(?) (the thing that the conveyor belt is connected to) isnt spinning. Everything else is spinning except for one on the bottom right..
It stops and then spins and I found that it makes the tic noise on start up.

Can someone help diagnose this problem?
JohnnyCho is offline   Reply With Quote
Old 05-25-2014, 08:27 AM   #2
4th Gear Member
AzPete's Avatar
Join Date: Aug 2008
Vehicle: 08 GT Vert, 02 GT Vert
Location: Panama City, FL
Posts: 1,214

Conveyor belt.....hmmm...never heard that reference to the serpentine belt before....

The item spinning part time is the air conditioner clutch functioning as it is supposed to. It operates based on the setting of the temp. inside the car. The tick noise is the magnetic clutch functioning.
Retired USAF
Panama City, Fl.
I wake up in the morning with nothing to do and by supper time, I have half of it done.

2000 Lightning, s/c, tuned, Basanni, built tranny
Sold them all.....
Previous Mustangs:4 - '66 Coupes(silver/blue/grey/red) '87 GT HO, '00/'02/'07 GT Vert(red)(grey)(black), '68 Coupe, '11 GT/CS, 08 GT Vert
AzPete is offline   Reply With Quote
Old 05-27-2014, 08:29 AM   #3
88 orangepeel notch
5th Gear Member
88 orangepeel notch's Avatar
Join Date: Mar 2010
Vehicle: 1988 notchback
Location: Wisconsin
Posts: 4,447

Conveyor belt, that is a new one, but good for you for at least opening the hood and investigating.
306 with all bolt ons, yada yada yada, letter cam, ported E7's, T5 swap, full exhaust, 3:55's, 2" drop, and the worst paint you'll ever see or feel.
Dyno'd 300/316, 2745lbs-track scale
Best ET………12.4@108, 1.66 60ft on 8" ET Drags.

88 orangepeel notch is offline   Reply With Quote


Similar Threads
Thread Thread Starter Forum Replies Last Post
High Pitch Whine. Help? FivePointToTheOh 2005-2014 Mustangs 9 09-29-2015 12:53 PM
I did a Video on Measuring for a New Serpentine Belt after a Smog Pump Delete on a 95 autoedit General Tech 0 09-27-2015 06:37 PM
My ac is stuck rafotree 4.6L (1996-2004 Modular) Mustang 5 09-22-2015 03:55 PM
A/C Port locations vargas 4.6L (1996-2004 Modular) Mustang 6 09-19-2015 01:42 PM
alternator. so hot will burn your hand on 2004 3.9 v6 mrmrultimate Texas Regional Chapter 2 09-10-2015 09:43 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 07:35 PM.

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company