What Type Pliers Are These?
#2
Not sure if this is it, but that little notch looks like where the end of a brake cable would sit when tightening up brakes on a bicycle. I have drum brakes on the rear on my mini chopper and that looks like the perfect pair of pliers to grab ahold of the cable when taking up the slack in the brake line. Could be wrong though
Here:
Here:
Last edited by yourmom6990; 01-22-2015 at 06:35 PM.
#3
They are notched to make it easier to grasp, squeeze and install / release spring type radiator or other hose clamps found on so many cars.
http://www.globalindustrial.com/p/to...FRNp7AodTT8AXw ....
http://www.globalindustrial.com/p/to...FRNp7AodTT8AXw ....
Last edited by tbear853; 01-22-2015 at 06:48 PM.
#5
They are notched to make it easier to grasp, squeeze and install / release spring type radiator or other hose clamps found on so many cars.
http://www.globalindustrial.com/p/to...FRNp7AodTT8AXw ....
http://www.globalindustrial.com/p/to...FRNp7AodTT8AXw ....
Thread
Thread Starter
Forum
Replies
Last Post
mrappe
V6 (1994-2004) Mustangs
0
09-26-2015 10:16 AM
JDWalton
4.6L V8 Technical Discussions
8
09-24-2015 08:47 PM