General Tech Ask model specific questions in the appropriate category below. All other general questions within.

2nd gear grinds when RPMs are high

Old 05-02-2015, 11:23 PM
  #1  
yourmom6990
4th Gear Member
Thread Starter
 
yourmom6990's Avatar
 
Join Date: Dec 2006
Location: Illinois
Posts: 1,396
Angry 2nd gear grinds when RPMs are high

So I have a 2014 v6 with just over 10k miles on it. When I shift from 1st to 2nd just before redline (7k), it won't go into gear and grinds terribly. Shifts normal when not under stress.

I have a short shifter, a bracket, stainless steel clutch line, and whiteline trans bushing and am still having an issue with 2nd gear.

Is anyone else having this problem? I think it's kind of early for the syncros to be going out but I know these MT82s have crappy plastic internals. Any input would be helpful. Thank you.
yourmom6990 is offline  
Old 05-03-2015, 09:28 AM
  #2  
jwog666
5th Gear Member
 
jwog666's Avatar
 
Join Date: Mar 2008
Location: wisconsin
Posts: 2,260
Default

you burned up the 2nd gear syncro, take it in , it will be a few weeks for parts. the only plastic internals are the shift fork fingers, and that the same in just about all transmissions.those will only burn up if the shifter is used as a hand rest
jwog666 is offline  
Old 05-04-2015, 07:20 AM
  #3  
FordService
Official Ford Rep
 
FordService's Avatar
 
Join Date: Oct 2010
Location: MI
Posts: 1,075
Default

Originally Posted by yourmom6990
So I have a 2014 v6 with just over 10k miles on it. When I shift from 1st to 2nd just before redline (7k), it won't go into gear and grinds terribly. Shifts normal when not under stress.

I have a short shifter, a bracket, stainless steel clutch line, and whiteline trans bushing and am still having an issue with 2nd gear.

Is anyone else having this problem? I think it's kind of early for the syncros to be going out but I know these MT82s have crappy plastic internals. Any input would be helpful. Thank you.
I agree with you bringing it in to your Ford Dealer to get it looked at, yourmom6990. Your service manager is in the best position to ensure a proper diagnosis, and will be able to provide available options and/or coverage for any work needed.

You can schedule an appointment online here. Let me know the outcome.

Deysha
FordService is offline  
Old 05-04-2015, 03:24 PM
  #4  
yourmom6990
4th Gear Member
Thread Starter
 
yourmom6990's Avatar
 
Join Date: Dec 2006
Location: Illinois
Posts: 1,396
Default

Originally Posted by FordService
I agree with you bringing it in to your Ford Dealer to get it looked at, yourmom6990. Your service manager is in the best position to ensure a proper diagnosis, and will be able to provide available options and/or coverage for any work needed.

You can schedule an appointment online here. Let me know the outcome.

Deysha
I appreciate your concern. But this vehicle is not under warranty.
yourmom6990 is offline  
Old 05-04-2015, 06:17 PM
  #5  
jwog666
5th Gear Member
 
jwog666's Avatar
 
Join Date: Mar 2008
Location: wisconsin
Posts: 2,260
Default

Originally Posted by yourmom6990
I appreciate your concern. But this vehicle is not under warranty.
powertrain is 5 years 50k miles FYI, just in case u thought it was all 3 years 36k miles
jwog666 is offline  
Old 05-04-2015, 08:30 PM
  #6  
yourmom6990
4th Gear Member
Thread Starter
 
yourmom6990's Avatar
 
Join Date: Dec 2006
Location: Illinois
Posts: 1,396
Default

So i've done some 1-2 shifts runs over the past couple days and I've come to the conclusion that this MT85 does not like speed shifting 1-2 like the T3650 did. If I give it an extra half second to engage, it goes in no problem. All other gears I am able to speed shift, but the 1-2 locks me out every time. My guess is because there is so much torque at the low gear and high RPMs that our remote style shifter does not line up properly. By waiting that extra half second, the RPMs start to barely come down therefore taking the stress off of the drivetrain resulting in 2nd engaging properly.
yourmom6990 is offline  
Old 05-04-2015, 08:44 PM
  #7  
jwog666
5th Gear Member
 
jwog666's Avatar
 
Join Date: Mar 2008
Location: wisconsin
Posts: 2,260
Default

Originally Posted by yourmom6990
So i've done some 1-2 shifts runs over the past couple days and I've come to the conclusion that this MT85 does not like speed shifting 1-2 like the T3650 did. If I give it an extra half second to engage, it goes in no problem. All other gears I am able to speed shift, but the 1-2 locks me out every time. My guess is because there is so much torque at the low gear and high RPMs that our remote style shifter does not line up properly. By waiting that extra half second, the RPMs start to barely come down therefore taking the stress off of the drivetrain resulting in 2nd engaging properly.

shifter line up is not your issue, by design that is impossible. either you are shifting before the clutch is disenguaged, or the syncro is worn.
jwog666 is offline  
Old 05-04-2015, 09:38 PM
  #8  
yourmom6990
4th Gear Member
Thread Starter
 
yourmom6990's Avatar
 
Join Date: Dec 2006
Location: Illinois
Posts: 1,396
Default

Originally Posted by jwog666
shifter line up is not your issue, by design that is impossible. either you are shifting before the clutch is disenguaged, or the syncro is worn.
How is that impossible? These are remote style shifters. Meaning the shifter does not rest on the trans. The rear of the shifter is actually bolted onto the body where as the rest of the drivetrain is to the frame/chassis.
yourmom6990 is offline  
Old 05-04-2015, 10:02 PM
  #9  
cruisin5268d
4th Gear Member
 
cruisin5268d's Avatar
 
Join Date: Mar 2014
Location: Austin, Texas
Posts: 1,155
Default

Originally Posted by yourmom6990
I appreciate your concern. But this vehicle is not under warranty.
2014 with 10k miles? How is it NOT under warranty? You must have voided it somehow, in which case you should stop abusing your car as that is likely what caused your current issue.
cruisin5268d is offline  
Old 05-04-2015, 11:07 PM
  #10  
yourmom6990
4th Gear Member
Thread Starter
 
yourmom6990's Avatar
 
Join Date: Dec 2006
Location: Illinois
Posts: 1,396
Default

Originally Posted by cruisin5268d
2014 with 10k miles? How is it NOT under warranty? You must have voided it somehow, in which case you should stop abusing your car as that is likely what caused your current issue.
There goes Cruisin. Jumping to conclusions as usual. You literally never have anything of value to say. If you don't have any input relating to the OP, then don't post at all. Why are you even a part of the forums? The vehicle has never been under warranty since I purchased it brand new. The reason is of none of your concern and had nothing to do with me.
yourmom6990 is offline  

Thread Tools
Search this Thread
Quick Reply: 2nd gear grinds when RPMs are high



All times are GMT -5. The time now is 06:43 PM.