67 throttle linkage
08-04-2015, 10:51 AM
#1
1st Gear Member
Thread Starter
Join Date: Aug 2015
Location: maryland
Posts: 78
67 throttle linkage
Posted in the swap thread but hoping I'll have more luck here
Long on my way through my motor swap in my 67 coupe. I6 to 351w. The motor is in the car and I'm starting to get the odds and ends together. But I need help with the throttle linkage. Not sure what to do to make my linkage work or where to buy a kit to make my linkage work. Obviously with the I6 the throttle is on the passable side but with the small block it will go on the driver side. Any help would be appreciated
Long on my way through my motor swap in my 67 coupe. I6 to 351w. The motor is in the car and I'm starting to get the odds and ends together. But I need help with the throttle linkage. Not sure what to do to make my linkage work or where to buy a kit to make my linkage work. Obviously with the I6 the throttle is on the passable side but with the small block it will go on the driver side. Any help would be appreciated
08-04-2015, 03:55 PM
#2
Foghorn Leghorn
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
There was a post a few years back in the classics section with a link to a really nifty linkage setup that I used on my 351W and it is silky smooth and doesn't bind at all.
Found it!
http://www.fordmuscle.com/archives/2...kage/index.php
I think I got most of the the stuff from Lowes.
Found it!
http://www.fordmuscle.com/archives/2...kage/index.php
I think I got most of the the stuff from Lowes.
Last edited by fastbackford351; 08-04-2015 at 03:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JDWalton
4.6L V8 Technical Discussions
8
09-24-2015 08:47 PM