To all Stroked S197 out there!
09-04-2007, 07:48 PM
#1
3rd Gear Member
Thread Starter
Join Date: Dec 2005
Location: CA
Posts: 634
To all Stroked S197 out there!
I just got my car back today from the shop and my numbers were 335 HP 333 TQ Stroked the motor to a 302 5.0. The rods are Manley H-Beam and the pistons are Manley Platinum Pistons. The crank is a 5.75 Kellogg crank. What do you guys think about the numbers? My car sounds totally pissed off. BTW my car is auto.
09-04-2007, 07:53 PM
#2
5th Gear Member
Join Date: May 2007
Location: N/A
Posts: 2,690
RE: To all Stroked S197 out there!
The numbers sound impressive. I'm planning to replace my internals (November) in prep for a supercharger but I have not done it yet.
How much did the work cost if you don't mind me asking?
How much did the work cost if you don't mind me asking?
09-04-2007, 07:55 PM
#3
2nd Gear Member
Join Date: Jul 2006
Location:
Posts: 441
RE: To all Stroked S197 out there!
I think these are respectable number espcially with the auto...real good.
A 302 is a 302 is a 302. Just like the 5.0's but now your dealing with 3v's.
Did you upgrade the cam's or still stock? How about the head's, any work?
What was the A/F ratio?
What kind of tune?
A 302 is a 302 is a 302. Just like the 5.0's but now your dealing with 3v's.
Did you upgrade the cam's or still stock? How about the head's, any work?
What was the A/F ratio?
What kind of tune?
09-04-2007, 08:08 PM
#7
2nd Gear Member
Join Date: Jul 2006
Location:
Posts: 441
RE: To all Stroked S197 out there!
Okay similar to this setup.
http://blowbyracing.com/vid-380.html
Claim to be yielding 380, but its a stick which is going to make quite a difference. Cam's have bit more lift and duration.
Love to get some clip or sound bytes.
By the way, congrats.
http://blowbyracing.com/vid-380.html
Claim to be yielding 380, but its a stick which is going to make quite a difference. Cam's have bit more lift and duration.
Love to get some clip or sound bytes.
By the way, congrats.
09-04-2007, 08:13 PM
#9
4th Gear Member
Join Date: Mar 2005
Location: California
Posts: 1,471
RE: To all Stroked S197 out there!
ORIGINAL: lynwood78
I just got my car back today from the shop and my numbers were 335 HP 333 TQ Stroked the motor to a 302 5.0. The rods are Manley H-Beam and the pistons are Manley Platinum Pistons. The crank is a 5.75 Kellogg crank. What do you guys think about the numbers? My car sounds totally pissed off. BTW my car is auto.
I just got my car back today from the shop and my numbers were 335 HP 333 TQ Stroked the motor to a 302 5.0. The rods are Manley H-Beam and the pistons are Manley Platinum Pistons. The crank is a 5.75 Kellogg crank. What do you guys think about the numbers? My car sounds totally pissed off. BTW my car is auto.
What other mods do you have installed?CAI with big MAF and intake tube, 62mm T/B, CMCP deletes, headers, down-pipe, mufflers, head work, cams, springs,lifters,COP, Meziere?
Cheers!
