Line Locks and install kit. Which brand???
#11
RE: Line Locks and install kit. Which brand???
I have the PMP setup. They fit in the fenderwells, one on each side. I have had them for at least a year and they have never given me a problem. Clean and easy install.
#12
RE: Line Locks and install kit. Which brand???
ORIGINAL: 07SCGT
Here is a pic from granatelli's web site, I use the same line locks and it has plenty of room without hitting the intercooler hoses. I would have sent you a pic of mine but 2 things have to happen,
1. Finish my coffee
2. Wash the engine compartment before I take any pictures of it, ( I know how you guys are).
If you want to see a different angle, I will be willing to do a close up from the top down view, just let me know.
I personally went with granatelli motor sports because it's a dual silenoid system, not just 1.
Here is a pic from granatelli's web site, I use the same line locks and it has plenty of room without hitting the intercooler hoses. I would have sent you a pic of mine but 2 things have to happen,
1. Finish my coffee
2. Wash the engine compartment before I take any pictures of it, ( I know how you guys are).
If you want to see a different angle, I will be willing to do a close up from the top down view, just let me know.
I personally went with granatelli motor sports because it's a dual silenoid system, not just 1.
#15
RE: Line Locks and install kit. Which brand???
ORIGINAL: 07SCGT
I have the JDMintake tubing with the airbox enclosure and I have about 8 inches of room between the CAI and the silenoids. It fits with no issues whatsoever.
I have the JDMintake tubing with the airbox enclosure and I have about 8 inches of room between the CAI and the silenoids. It fits with no issues whatsoever.
Thanks,
TASSY5
I also heard duel silinoids are better also, correct me if I am wrong.
#18
RE: Line Locks and install kit. Which brand???
#19
RE: Line Locks and install kit. Which brand???
ORIGINAL: alloutt
is there any other dual kits beside GMS?
GMS is so so
is there any other dual kits beside GMS?
GMS is so so
http://www.pmpparts.com/index.php?ma...roducts_id=187
Pic above of the pass side install