just got the procharger installed!!! ***UPDATED*** pics and vid
01-18-2008, 10:14 PM
#13
2nd Gear Member
Join Date: Dec 2006
Location: New Orleans,, Louisiana
Posts: 416
RE: just got the procharger installed!!!
ORIGINAL: *bmxking*
just had Dyno tune performace install my procharger and i could not be happier. laid down 527hp and 426lb tq. havn't got a chance to play because of the weather here in va but there is always tomorrow. highly recommend this supercharger if you want everyone to here it. sounds like a mini f16 under the hood. just thought i would let everyone kow my numbers.
just had Dyno tune performace install my procharger and i could not be happier. laid down 527hp and 426lb tq. havn't got a chance to play because of the weather here in va but there is always tomorrow. highly recommend this supercharger if you want everyone to here it. sounds like a mini f16 under the hood. just thought i would let everyone kow my numbers.
I thought anything over 500 at the crank is pushing the limit on motor life.
01-19-2008, 02:43 PM
#16
RE: just got the procharger installed!!!
those numbers are at the wheels and i have heard the same about the rating but they have done the same on another (vabeachmustang)and he has had his for over a year and still no problems. i have the vid on my computer but i havn't figured out how to get it on hear it is not in the right kind of file. when i get home i will post a pic of the dyno sheet.
01-19-2008, 03:31 PM
#17
4th Gear Member
Join Date: Jul 2007
Location:
Posts: 1,062
RE: just got the procharger installed!!!
Its not the HP numbers that the engine is limited by, its cylinder pressures = engine torque. An example is the ProChargers and Brenspeeds Paxton kit. Both run close to 500 rwhp, but usually under 425 ft-lbs torque. Either of these kits are probably easier on your engine then an 8 psi Saleen. (The centris do not produce more power then the Saleen blower until after 5000 RPM.)
01-20-2008, 09:01 AM
#18
RE: just got the procharger installed!!!
here is a pic of the dyno sheet
[IMG]local://upfiles/30052/F86DB5AD7C924EFE9628DD5B46969306.jpg[/IMG]
[IMG]local://upfiles/30052/9A880A24FD8543018A0F7F4D6912A1D2.jpg[/IMG]
[IMG]local://upfiles/30052/F86DB5AD7C924EFE9628DD5B46969306.jpg[/IMG]
[IMG]local://upfiles/30052/9A880A24FD8543018A0F7F4D6912A1D2.jpg[/IMG]
01-20-2008, 09:32 AM
#19
RE: just got the procharger installed!!!
here r some vids of my car on the dyno. sorry about the quality but had to tape them of of my buddies computer. dont worry about the idiot who walked in front of the camera. dont worry about the softball game clip at the end either.
http://youtube.com/watch?v=_Cq3sAPcRZM first pull
http://youtube.com/watch?v=FZXoluw1YmA second pull
http://youtube.com/watch?v=b7se55SxUfo
http://youtube.com/watch?v=_Cq3sAPcRZM first pull
http://youtube.com/watch?v=FZXoluw1YmA second pull
http://youtube.com/watch?v=b7se55SxUfo
01-20-2008, 12:02 PM
#20
3rd Gear Member
Join Date: Oct 2007
Location:
Posts: 860
RE: just got the procharger installed!!!
Since you did so well with the P1SC w/ 11 psi, I wonder what I will be able to do with 10 psi on my D1SC...
those are some good numbers for just 11psi...how much did the other guy they tuned put down w/ 11 psi in his car?
those are some good numbers for just 11psi...how much did the other guy they tuned put down w/ 11 psi in his car?
