Whipple w/FRPP cams - First start up
08-23-2008, 11:50 PM
2nd Gear Member
Join Date: Nov 2007
Location: Gainesville GA
Posts: 329
08-24-2008, 06:18 AM
3rd Gear Member
Join Date: Mar 2006
Location: Connecticut
Posts: 758
Awsome Ham !...Don t worry i'll cover you on the vid part...
08-24-2008, 09:25 AM
3rd Gear Member
Join Date: Mar 2006
Location: Connecticut
Posts: 758
08-24-2008, 10:10 AM
5th Gear Member
Join Date: Apr 2005
Location: Babylon, NY
Posts: 3,031
Nice job Hammeron, Let us know what you about a tune and post up the dyno sheet too!
08-24-2008, 04:52 PM
6th Gear Member
Thread Starter
Join Date: May 2006
Location: Nicely done
Posts: 11,881
thanks doc,
i updated the first post on the
first page, after the test drive today
08-25-2008, 06:50 AM
5th Gear Member
Join Date: Jun 2007
Location: Orlando, FL
Posts: 2,276
Hamm Congrats
Glad to hear it is going well. Defineatly spring for a Dyno tune now. I would bet it would clear up the slight torque loss down low.
08-25-2008, 09:32 AM
6th Gear Member
Thread Starter
Join Date: May 2006
Location: Nicely done
Posts: 11,881
vocoat is getting a custom tune and
we'll know this evening, if a tune brings
back the low rpm torque
if it does, these cams are too good to be
true......incredible lope, along with the
power you're already accustomed too.....
08-25-2008, 03:44 PM
4th Gear Member
Join Date: Apr 2007
Location: So Cal
Posts: 1,323
Congrats! I wouldnt get on it until you get it tuned. Cams just change everything.
08-25-2008, 04:09 PM
6th Gear Member
Thread Starter
Join Date: May 2006
Location: Nicely done
Posts: 11,881
yeah black, several people have said this
and i'm gonna heed the advice.....
08-25-2008, 06:12 PM
4th Gear Member
Join Date: Apr 2007
Location: So Cal
Posts: 1,323
berry nice. I think your the first whipple guy on this forum to have a set of aftermarket cams. Just steppin up the game huh. Good work. From what i was told, once tuned, it will look like you gained an rpm on your dyno.