When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Andy, there is no harm in checking the calibration and it is simple to do. I checked it for comparisons sake before installation and it was spot on. Sorry for the delayed response!
Andy, there is no harm in checking the calibration and it is simple to do. I checked it for comparisons sake before installation and it was spot on. Sorry for the delayed response!
Holy three month old post batman!
Check the alignment when installing this throttle body. There is enough slop in the mounting holes to allow it to be off top to bottom or side to side compared to the intake manifold inlet holes. See my post in the 4.6 section for details. https://mustangforums.com/forum/4-6l...ttle-body.html
Check the alignment when installing this throttle body. There is enough slop in the mounting holes to allow it to be off top to bottom or side to side compared to the intake manifold inlet holes. See my post in the 4.6 section for details. https://mustangforums.com/forum/4-6l...ttle-body.html