Originally Posted by Jackal137
Not sure if it's after market or not to be completely honest, but a few of the guys I work with tracked it down to be the alarm it self. They jerry rigged a temp fix until I can get it removed or fixed properly. So the beeping is gone and I assume I'll just have to go to a dealership to get my key fobs reset.
Programming key fob
Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (Off is the position where you can remove your key, RUN is the postion just shy of starting your car.)
Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4.
Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 3. for all other remotes.
Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.