Long Tubes
#3
RE: Long Tubes
i agree with hawgman jba not my choice but get them coated if you do go with them. the htc/jet hot coatings are actually proven to be worth a small amount of hp + you will reduce the under hood heat and that can also help with hp. i bought hooker l/t's because to me it didn't make sense to buy a expensive stainless header then coat it. the mild steel headers will last forever with the htc coating on them. hooker l/t allow the use of the stock h-pipe by cutting off the converters(4" past the hanger). i also used 2 of the factory stainless 360 degree exhaust clamps on the collector to h-pipe connection instead of enlarging the h-pipe to slip over the headers. it makes it easy to do in your garage without the need of a pipe expander + it looks factory and doesn't mess up the header or pipe when tightened.
#6
RE: Long Tubes
I went with the JBA Longtubes with the Titanium Ceramic Coating and the Catted H-Pipe. You need to install a set of Steeda engine mounts if you don't want them to rub against the frame rails or the steering column. They look and sound great but they aren't cheap and a bit of a pain to install.
#7
RE: Long Tubes
You need to install a set of Steeda engine mounts if you don't want them to rub against the frame rails or the steering column.
#8
RE: Long Tubes
ORIGINAL: F00Mustang
Oh WOW!, I did not know that and it is nowhere on JBA's website. Has anyone else had any problems like that with Long tub header going on.
You need to install a set of Steeda engine mounts if you don't want them to rub against the frame rails or the steering column.
#9
RE: Long Tubes
yeah mine hits the steering column. it's a little unnerving when i'm making a hard right turn and the steering feels like it's locking. it has slowed me way down on the turns! i'm going to get some urethane mounts when i install the k/member and stuff. it scared the sh*t out of me the first time it did it. hooker never said anything about it either!!
i have no cats.... i'm a dog person.
i have no cats.... i'm a dog person.
#10
RE: Long Tubes
ORIGINAL: F00Mustang
Oh WOW!, I did not know that and it is nowhere on JBA's website. Has anyone else had any problems like that with Long tub header going on.
You need to install a set of Steeda engine mounts if you don't want them to rub against the frame rails or the steering column.