Track times & Time Slips
06-03-2013, 08:22 PM
Join Date: Apr 2013
Location: Texas
Posts: 6
2012 Mustang GT 5.0
AT
Air Raid CAI
SCT 3015 Tune 93oct
bbk cat deletes welded on.
Stock h-pipe
Bassani axle back.
235/45/18 stock tires
3:15 rear end
r/t- .491
60'- 1.976
1/8- 8.005
mph- 91.23
1000- 10.3
ET- 12.29
mph- 111.70
The run was done before i removed the Cats.
07-04-2013, 11:07 PM
2nd Gear Member
Join Date: Feb 2013
Location: Canada - Alberta
Posts: 188
Car #24 12.86 @ 112.07
2013 GT
Steeda 101mm Intake
JBA Xpipe /w Cat Deletes
Roush Axle Back
Bama 93 Race Tune
Stock 245/45/19 Pirelli's
Misc Info:
Full Tank of Gas
Locked outta 3rd
Track is 2400ft above sea level
08-27-2013, 08:32 PM
Join Date: Aug 2013
Location: Oregon
Posts: 38
09-29-2013, 08:21 AM
Join Date: Sep 2013
Location: FL
Posts: 23
bkduk
Last edited by FiveSlow87; 03-21-2019 at 07:44 PM .
12-26-2013, 06:39 PM
5th Gear Member
Join Date: Sep 2010
Location: IN
Posts: 2,248
Here are my slips from lucasoil in clermont indiana
Since then I added a bigger radiator and sound deadening material which has put me to about 11.7
12-26-2013, 06:59 PM
2nd Gear Member
Join Date: Mar 2013
Location: Ca.
Posts: 321
Quote:
Originally Posted by
outceltj
Here are my slips from lucasoil in clermont indiana
Since then I added a bigger radiator and sound deadening material which has put me to about 11.7
How many PSI were you running the Saleen S/C at?
12-26-2013, 07:05 PM
5th Gear Member
Join Date: Sep 2010
Location: IN
Posts: 2,248
Quote:
Originally Posted by
Fabman
How many PSI were you running the Saleen S/C at?
I'm set up at 9.5 psi right now. I have to build the motor before adding more
12-26-2013, 07:12 PM
2nd Gear Member
Join Date: Mar 2013
Location: Ca.
Posts: 321
Quote:
Originally Posted by
outceltj
I'm set up at 9.5 psi right now. I have to build the motor before adding more
That's a very respectable time for a stock block on 9 psi. Good job.
12-26-2013, 08:11 PM
5th Gear Member
Join Date: Sep 2010
Location: IN
Posts: 2,248
Thanks bud. What's your time
12-26-2013, 11:27 PM
2nd Gear Member
Join Date: Mar 2013
Location: Ca.
Posts: 321
Haven't run the new motor yet but the old one went 10.80's.
This one should be significantly faster....but we'll have to see.