When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We did a few pulls and our average RWHP was 491! Average torque was 372ft/lbs! That was on our 2 and 4WD Mustang Dyno. We are putting together a video with the dyno results that should be on our YouTube page in a week or so!
We did a few pulls and our average RWHP was 491! Average torque was 372ft/lbs! That was on our 2 and 4WD Mustang Dyno. We are putting together a video with the dyno results that should be on our YouTube page in a week or so!
. IF it's 100 % stock, based on advertised hp, ( 526 ), that's only 6.7 % drive train loss, which is excellent.
How many miles on the car ?
SAE J1349 corrections ?
.
Amazing, most of the posts I've seen are 469ish. You must have a really sweet engine producing way more than the advertised hp. I know the 5.0 crate motors put down north of 450hp at the flywheel which is way over the advertised.
. IF it's 100 % stock, based on advertised hp, ( 526 ), that's only 6.7 % drive train loss, which is excellent.
How many miles on the car ?
SAE J1349 corrections ?
.