When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you don't have a scanner and other expensive electronic tools, I doubt you can fix the car yourself. You paid $60K+ for the damn car, let them fix it correctly the first time. I have one and they are damn complicated.
I'm knew to the forum not to the car industry. I've built many race cars and have all the tools I need to take the car apart. I was trying to see if anyone else has had the same issue maybe they can share what the problem was before spending time to figure out the issue myself. I got a scanner last night.
Before the mustang I had a 2015 Z/28 before that 2012 CTSV Car made 697HP pump gas at 6,700 RPM. Before the CTSV i used to build Imports. I can go on and on. Not trying to brag but I have a lot of knowledge about cars Been doing this for a very long time I'm also a photographer I'll share some photos.
Here are some of my cars I've built. Car's are not complicated. It can only be a sensor or vacuum leak or a throttle body issue. Doubt it would be a wiring problem or a knock in the motor. I'll check the code and post results
Here are some of my cars I've built. Car's are not complicated. It can only be a sensor or vacuum leak or a throttle body issue. Doubt it would be a wiring problem or a knock in the motor. I'll check the code and post results
Hopefully the code is just something stupid that can be fixed quickly. That shouldn't happen regardless of what vehicle it is (barely driven off the factory).
Hopefully the code is just something stupid that can be fixed quickly. That shouldn't happen regardless of what vehicle it is (barely driven off the factory).
Thank you.
Finally figured out the issue This is why it's very important for people to share information on tech section to help each other out. I noticed the wrench light would usually turn on at incline or when brakes are applied. I also noticed the Hill Clime Assist wouldn't work all the time. The issue was the brake switch. Bad Brake switch. Problem solved.