best mod's
#21
RE: best mod's
I'm stickying this because there's some darn good info flying around in here (good job, rebel!)
As long as the discussion stays on task (i.e. - tech related), it will stay up here and we'll start to build the tech side of our section.
As long as the discussion stays on task (i.e. - tech related), it will stay up here and we'll start to build the tech side of our section.
#22
Mach I Section Moderator
Thread Starter
Join Date: Mar 2007
Location: round abouts these parts
Posts: 7,140
RE: best mod's
sweet! we're gonna be like everyone else!
yes, a mach pushing boost would benefit even more than the non-boosted mach due to the volume of air being smashed into the engine.
another fairly cheap mod for the machs would be to port and polish the intake....im trying to run down NAZman to get prices.
yes, a mach pushing boost would benefit even more than the non-boosted mach due to the volume of air being smashed into the engine.
another fairly cheap mod for the machs would be to port and polish the intake....im trying to run down NAZman to get prices.
#23
Mach I Section Moderator
Thread Starter
Join Date: Mar 2007
Location: round abouts these parts
Posts: 7,140
RE: best mod's
ok here is nazman's prices for his services
The rates are as follows:
Intakes fully ported/cut plenum, TIG welded and Painted: $525.00 Shipped
Same as above but Short Runner: $875.00 Shipped
Heads: $550.00 each shipped (this is a full-on port ~308/226CFMs I/E at .500 lift! Gains of over 30% from .100 lift! Flowed by Modular Performance.
Turn around for intakes is ~10 days, for head work ~3 weeks.
Naz
Intakes fully ported/cut plenum, TIG welded and Painted: $525.00 Shipped
Same as above but Short Runner: $875.00 Shipped
Heads: $550.00 each shipped (this is a full-on port ~308/226CFMs I/E at .500 lift! Gains of over 30% from .100 lift! Flowed by Modular Performance.
Turn around for intakes is ~10 days, for head work ~3 weeks.
Naz
#24
RE: best mod's
The aluminum driveshaft is something I'm looking at doing. I do know that the spacer is mainly a torque mod. She does feel a bit stronger throughout... not necessarily faster, but just strong... a bit more umph.
Spacer = a great mod for the money
having more torque is more fun anyways [8D]
Are gears on this list? Though the install for gears can be reletively expenisve, so can LTs and such. I would love to get some 4.30 gears
Spacer = a great mod for the money
having more torque is more fun anyways [8D]
Are gears on this list? Though the install for gears can be reletively expenisve, so can LTs and such. I would love to get some 4.30 gears
#26
RE: best mod's
ORIGINAL: USMCrebel
gears added, i dont know the average price, so i left it blank.
gears added, i dont know the average price, so i left it blank.
#27
RE: best mod's
ORIGINAL: USMCrebel
sweet! we're gonna be like everyone else!
yes, a mach pushing boost would benefit even more than the non-boosted mach due to the volume of air being smashed into the engine.
another fairly cheap mod for the machs would be to port and polish the intake....im trying to run down NAZman to get prices.
sweet! we're gonna be like everyone else!
yes, a mach pushing boost would benefit even more than the non-boosted mach due to the volume of air being smashed into the engine.
another fairly cheap mod for the machs would be to port and polish the intake....im trying to run down NAZman to get prices.
#29
RE: best mod's
Very retarded! That would be against all laws of physics.
$550's not a bad price for a port and polish, especially on the heads. PHP wants $1200 to port the intake. Those gains on the ported heads are impressive with that amount of lift.
$550's not a bad price for a port and polish, especially on the heads. PHP wants $1200 to port the intake. Those gains on the ported heads are impressive with that amount of lift.