Post Your Mods!
08-31-2009, 07:34 PM
#1
5th Gear Member
Thread Starter
Join Date: Apr 2005
Location: Richmond, Virginia
Posts: 4,083
Post Your Mods!
I thought it would be nice to have a thread dedicated to what each of us have as far as modifications go. I'm also trying to seek out ideas of what to do to mine next! So... POST EM UP, unless this is a repost somewhere...
Here's mine:
- Magnapacks
- VRS O/R x-pipe
- JLT rai
- MGW shifter
- PHP intake spacer
- 18x9 AFS Mach 1s w/ black inserts
- 275/35/18 Vredesteins
- 14" Shorty antenna
- Vogtland springs
- MM c/c plates
- FRPP 4.10s
- Tokico D-Spec shocks/struts
I think that's it.
Here's mine:
- Magnapacks
- VRS O/R x-pipe
- JLT rai
- MGW shifter
- PHP intake spacer
- 18x9 AFS Mach 1s w/ black inserts
- 275/35/18 Vredesteins
- 14" Shorty antenna
- Vogtland springs
- MM c/c plates
- FRPP 4.10s
- Tokico D-Spec shocks/struts
I think that's it.
.
09-01-2009, 08:00 AM
#6
corner carver
Join Date: Oct 2006
Location: New England
Posts: 4,371
Current:
17x9 BBS RX with Falken Azenis RT-615's
Magnaflow Magnapacks
SLP O/R X Pipe
K&N Drop In
3/8" Intake Spacer
H&R Supersports
Bilstein HD Shocks/Struts
Corbeau FX-1 Pro Seats
Corbeau Harness Bar
G-Force 6 Point Camlock Harnesses
MGW Short Throw
FRPP Shift ****
By next race season:
Corner Weighted
MM 350# Front Coil-overs
MM Adjustable RLCA's
MM CC Plates (5* Positive Caster, 2-3 Negative Camber)
MM Panhard Bar
JLT CAI
Dyno Tune
17x9 BBS RX with Falken Azenis RT-615's
Magnaflow Magnapacks
SLP O/R X Pipe
K&N Drop In
3/8" Intake Spacer
H&R Supersports
Bilstein HD Shocks/Struts
Corbeau FX-1 Pro Seats
Corbeau Harness Bar
G-Force 6 Point Camlock Harnesses
MGW Short Throw
FRPP Shift ****
By next race season:
Corner Weighted
MM 350# Front Coil-overs
MM Adjustable RLCA's
MM CC Plates (5* Positive Caster, 2-3 Negative Camber)
MM Panhard Bar
JLT CAI
Dyno Tune
09-01-2009, 08:01 AM
#7
corner carver
Join Date: Oct 2006
Location: New England
Posts: 4,371
Current:
17x9 BBS RX with Falken Azenis RT-615's
Magnaflow Magnapacks
SLP O/R X Pipe
K&N Drop In
3/8" Intake Spacer
H&R Supersports
Bilstein HD Shocks/Struts
Corbeau FX-1 Pro Seats
Corbeau Harness Bar
G-Force 6 Point Camlock Harnesses
MGW Short Throw
FRPP Shift ****
By next race season:
Corner Weighted
MM 350# Front Coil-overs
MM Adjustable RLCA's
MM CC Plates (5* Positive Caster, 2-3 Negative Camber)
MM Panhard Bar
JLT CAI
Dyno Tune
17x9 BBS RX with Falken Azenis RT-615's
Magnaflow Magnapacks
SLP O/R X Pipe
K&N Drop In
3/8" Intake Spacer
H&R Supersports
Bilstein HD Shocks/Struts
Corbeau FX-1 Pro Seats
Corbeau Harness Bar
G-Force 6 Point Camlock Harnesses
MGW Short Throw
FRPP Shift ****
By next race season:
Corner Weighted
MM 350# Front Coil-overs
MM Adjustable RLCA's
MM CC Plates (5* Positive Caster, 2-3 Negative Camber)
MM Panhard Bar
JLT CAI
Dyno Tune
09-01-2009, 03:04 PM
#9
2nd Gear Member
Join Date: May 2003
Location: New Castle, Delaware
Posts: 389
You're gonna need a few minutes to digest mine LOL!
2003 Torch Red Ford Mustang Mach 1, 5-speed, Interior Upgrade Package
PERFORMANCE MODS
Ford Racing 4.6L Aluminator Long Block
03/04 Cobra heads and cams
Fully Forged Internals, Manley Rods and Pistons, 8.5:1CR
Kenne Bell 2.1 Twin Screw, Intercooled Supercharger, 16lbs. of Boost
Innovators West Modular Motor 10% Overdrive SFI Approved Harmonic Balancer
Gates Drive-align Tensioner Assembly
Fluidyne 2-Row Maximum Duty Aluminum Radiator
Kooks Long Tube 1 3/4" x 3" Headers
Kooks 3" High Flow Catted X-Pipe w/2.5" Outlet
Borla Stinger 2.5" Catback w/4" Chrome Tips
Accufab Polished Monoblade Throttle Body Assembly For 03/04 Cobra
SCT 3000 Big Air 90mm MAF Meter w/Billet Housing
JLT 12" High Boost Cold Air Induction Assembly in Torch Red
Sieman Deka 60lb. High Imp. Injectors
Fore Precision Billet Fuel Rails
Dual Ford GT Fuel Pump System w/Fuel Filter Upgrade & Additional FPDM Wiring Upgrade
Fore Precision Billet Fuel Pump Hat
Ford Racing 3.73 Ring and Pinion gears
Eaton Detroit True-Trac 8.8" 31 Spline Limited Slip Differential
Moser 31 Spline Hardened C-Clip Axles
SPEC Stage 2+ Clutch Kit
SPEC Lightweight Steel Flywheel Assembly
Steeda Full Length Welded Subframe Connectors
Steeda Steel Upper/Lower Control Arms
Swarr Automotive SWARR BAR Axle Tube Brace
MRT Street Performance Springs 1" Drop
Ford Racing Aluminum Driveshaft
BAER Decelarotors Cross-Drilled/Slotted Rotors/Hawk Brake Pads
Hurst Billet-Plus/Chrome Handled Retro Shifter
MMR Rear Seat Delete Kit
MRT Interceptor Instrument Cluster
Autometer Cobalt Gauges
Aeroforce Interceptor OBDII Scan Gauge
Autometer Dual Gauge Instrument Bezel
Autometer Single Gauge Steering Wheel Pod
Speed-of-Sound Dual Gauge A-pillar gauge pod
Custom Dyno Tuning by Chris Rose @Tillman Speed
SCT XCAL 3 Handheld Tuner
APPEARANCE / PERSONALIZATION MODS
Wheel Replicas Silver FR500 Wheels, 17"x9" Fronts, 17"x10.5" Rears
Sumitomo HTRZ 275/40/17 Front Tires, Sumitomo HTRZ 315/35/17 Rear Tires
CobraJet Shaker Emblems
Ford Racing Chrome Plated Stainless Steel Hood Pins w/Hair Pin Clips & Lanyards
Ford Racing Chrome Coil Covers
Black Reflective Bumper Inserts
4.6 Supercharged Fender Badges
Visus Rear Window Louvers
Web Electric Sequential Turn Signals
Ford Racing Shoulder Belt Pads
Custom Mach 1 Owner Tags
Custom Mach 1 Floor Mats
2003 Torch Red Ford Mustang Mach 1, 5-speed, Interior Upgrade Package
PERFORMANCE MODS
Ford Racing 4.6L Aluminator Long Block
03/04 Cobra heads and cams
Fully Forged Internals, Manley Rods and Pistons, 8.5:1CR
Kenne Bell 2.1 Twin Screw, Intercooled Supercharger, 16lbs. of Boost
Innovators West Modular Motor 10% Overdrive SFI Approved Harmonic Balancer
Gates Drive-align Tensioner Assembly
Fluidyne 2-Row Maximum Duty Aluminum Radiator
Kooks Long Tube 1 3/4" x 3" Headers
Kooks 3" High Flow Catted X-Pipe w/2.5" Outlet
Borla Stinger 2.5" Catback w/4" Chrome Tips
Accufab Polished Monoblade Throttle Body Assembly For 03/04 Cobra
SCT 3000 Big Air 90mm MAF Meter w/Billet Housing
JLT 12" High Boost Cold Air Induction Assembly in Torch Red
Sieman Deka 60lb. High Imp. Injectors
Fore Precision Billet Fuel Rails
Dual Ford GT Fuel Pump System w/Fuel Filter Upgrade & Additional FPDM Wiring Upgrade
Fore Precision Billet Fuel Pump Hat
Ford Racing 3.73 Ring and Pinion gears
Eaton Detroit True-Trac 8.8" 31 Spline Limited Slip Differential
Moser 31 Spline Hardened C-Clip Axles
SPEC Stage 2+ Clutch Kit
SPEC Lightweight Steel Flywheel Assembly
Steeda Full Length Welded Subframe Connectors
Steeda Steel Upper/Lower Control Arms
Swarr Automotive SWARR BAR Axle Tube Brace
MRT Street Performance Springs 1" Drop
Ford Racing Aluminum Driveshaft
BAER Decelarotors Cross-Drilled/Slotted Rotors/Hawk Brake Pads
Hurst Billet-Plus/Chrome Handled Retro Shifter
MMR Rear Seat Delete Kit
MRT Interceptor Instrument Cluster
Autometer Cobalt Gauges
Aeroforce Interceptor OBDII Scan Gauge
Autometer Dual Gauge Instrument Bezel
Autometer Single Gauge Steering Wheel Pod
Speed-of-Sound Dual Gauge A-pillar gauge pod
Custom Dyno Tuning by Chris Rose @Tillman Speed
SCT XCAL 3 Handheld Tuner
APPEARANCE / PERSONALIZATION MODS
Wheel Replicas Silver FR500 Wheels, 17"x9" Fronts, 17"x10.5" Rears
Sumitomo HTRZ 275/40/17 Front Tires, Sumitomo HTRZ 315/35/17 Rear Tires
CobraJet Shaker Emblems
Ford Racing Chrome Plated Stainless Steel Hood Pins w/Hair Pin Clips & Lanyards
Ford Racing Chrome Coil Covers
Black Reflective Bumper Inserts
4.6 Supercharged Fender Badges
Visus Rear Window Louvers
Web Electric Sequential Turn Signals
Ford Racing Shoulder Belt Pads
Custom Mach 1 Owner Tags
Custom Mach 1 Floor Mats