High mileage mach 1s
#2
That said, here is a Mach in Wichita Falls with only 60K on it for $14000.
http://dallas.craigslist.org/dal/cto/3146242110.html
#4
I agree with the above. See if they have service records, if not that's still not reason to run away because a lot of us do our own work. Look down in the valve cover through the oil fill and see if everything is silver, if it's darker and copper colored then maybe shy away. Then again I have had cars that were a little dirty inside the engine but ran fine for a long time.
Look in the wheel wells for rubber, if there's a ton of rubber you know they were doing some burnouts, again not the end of the world but something to think about how they probably drove the car. Just look at the overall condition of the car and that's usually a good indication of how well it was taken care of. Is the interior crapped up? did they bother to clean the car to sell it? Things like that will give you an idea. Check for rust too, there are plenty of Mach 1's around still so there is really no reason to settle for one you're not 100% sure about.
Look in the wheel wells for rubber, if there's a ton of rubber you know they were doing some burnouts, again not the end of the world but something to think about how they probably drove the car. Just look at the overall condition of the car and that's usually a good indication of how well it was taken care of. Is the interior crapped up? did they bother to clean the car to sell it? Things like that will give you an idea. Check for rust too, there are plenty of Mach 1's around still so there is really no reason to settle for one you're not 100% sure about.
#6
#7
I almost bought one for 13500 until i found out it was automatic. Right now there is a white 99 cobra with 30,000 miles and a flawless body. No knicks or scratches. I offered him 13k. He said yes but i dont know if thats a good deal on a 99. Im still thinking it through. I really want an azure blue mach one but i cant find one in my price range.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM