TXMach

...mating a BBK Twin-65mm throttle body with the JLT Performance Next Generation Ram Air Intake? (03-04 Mach 1)

I ask because I ran into an issue with using that particular throttle body with my stock intake tube. The "mouth" of the throttle body is too long and the stock intake tube is too shallow before the TB hits the inner lip of the tube. This resulted in not being able to clamp properly, subsequently causing a massive vacuum leak. So now I'm looking for an intake tube that will fit with that particular BBK throttle body.

It seems JLT knows a bit about what they are doing so I'd like to go with it. Not that I'll see much, if any gains from this intake, but at least it might work with the TB.