MustangForums.com

MustangForums.com (http://mustangforums.com/forum/index.php)
-   Members Mustangs (http://mustangforums.com/forum/members-mustangs-97/)
-   -   My new build (2013 5.0) (http://mustangforums.com/forum/members-mustangs/701641-my-new-build-2013-5-0-a.html)

Sleeper_GT 09-30-2013 10:40 AM

My new build (2013 5.0)
 
I know some of you followed my 2012 build, now it's on to the 2013. Well, here it is, the big change.

As we go through the pics and parts they should look really familiar since they are coming off the "Original Sleeper_GT".

Before we started
https://lh3.googleusercontent.com/-X...o/IMG_7582.jpg

https://lh3.googleusercontent.com/-b...o/IMG_7581.jpg

https://lh6.googleusercontent.com/-E...o/IMG_7588.jpg

BMR K-member
https://lh5.googleusercontent.com/-X...o/IMG_7583.jpg

Koni Yellows, Hotchkis Springs and Ground Control C/C Plates
https://lh6.googleusercontent.com/-1...o/IMG_7584.jpg

Stainless Works LT's with High Flow Cats and X-Pipe
https://lh6.googleusercontent.com/-O...o/IMG_7585.jpg

Stock axle with 3.31
https://lh4.googleusercontent.com/-y...o/IMG_7587.jpg

Took the axle of Black (3.73's) and put it on Blue. Koni Yellows, Hotchkis Springs, Whiteline LCA, Whiteline Panhard, Whiteline Chassis support, Whiteline LCA relo brackets, METCO UCA
https://lh5.googleusercontent.com/-r...o/IMG_7586.jpg
https://lh4.googleusercontent.com/-C...o/IMG_7591.jpg

Pulled the stock intake from blue to put on black
https://lh5.googleusercontent.com/-i...o/IMG_7594.jpg

MGW from Black now in Blue
https://lh4.googleusercontent.com/-O...o/IMG_7593.jpg

Finishing the install of the METCO UCA
https://lh6.googleusercontent.com/-p...o/IMG_7589.jpg

MegnaFlow Black Quad Tip Axleback with GT500 Diffuser
https://lh6.googleusercontent.com/-B...o/IMG_7599.jpg

Textured Black ForgeStar 19x9 and 19x11
https://lh3.googleusercontent.com/-H...o/IMG_7598.jpg

Forgot to take a picture of the one piece DS and the BMR K-member with everything on it. The K-Member is frick'n awesome even though it was a PITA. Really cleans up the underside and tons of room. The SOS gauge pod, supercharger and BAP still need to be installed along with the BMR Radiator support. I have a lot of work left, but if it wasn't for Jeff, Mike and Jason I wouldn't even have got this far in one day. Tons more pictures to come as this build continues........

Jeffk 09-30-2013 11:05 AM

That UCA is a nice piece too.

We didn't end up with nearly as many busted knuckles as I thought we would.

Sleeper_GT 09-30-2013 11:13 AM

I know right.....Other than, "Hey where's the 18mm" and "Where's the header nut" and "Where's......" everything went pretty smooth....LOL

ModBargains 09-30-2013 11:42 AM

Wow great start to a build thread! Congrats on the new car and new parts!

Jeffk 09-30-2013 12:17 PM

Quote:

Originally Posted by Sleeper_GT (Post 8288286)
I know right.....Other than, "Hey where's the 18mm" and "Where's the header nut" and "Where's......" everything went pretty smooth....LOL

We needed like 15 more 18mm & 15mm sockets. LOL.

Sleeper_GT 09-30-2013 12:20 PM

I spent about 30 minutes yesterday going through and organizing the small tool box. I need to do the same to the big one. Most likely I'll have to get a few more socket organizers.

Jeffk 09-30-2013 01:36 PM

You failed to post the best pics.

The man himself working his ass off.

https://lh3.googleusercontent.com/-6...o/IMG_7597.jpg

Sleeper_GT 09-30-2013 02:40 PM

Pull one out of my Album.....LOL....Nice pic Jeff. :icon_toast:

Lokota 09-30-2013 03:13 PM

mmmmoooooooaaaarrrrr

Jeffk 09-30-2013 03:25 PM

Quote:

Originally Posted by Sleeper_GT (Post 8288401)
Pull one out of my Album.....LOL....Nice pic Jeff. :icon_toast:

Who do you think took it? Along with the one of you installing the shifter. LOL!


All times are GMT -5. The time now is 01:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.