badass84gt

I recieved my 84 GT T-top as a roller on Feb 14th and had been collecting the parts for it long before I got it. This was by far my shortest build and the one Im most satisfied with. I took it to the drags last friday and ran a 13.802 at 102 with carb issues and my tranny grinding in all gears. Ive since put on a BG Speed Demon 650dp and the problems are gone and Ill be putting the new T5Z in tomorrow. Heres the pics and full specs of the build. Let me know what you think and what she should be capable of.











306 GT40P motor
TF Stage 1 cam
1.6 FRPP roller rockers
Edelbrock Performer RPM air gap TMOSS ported
BG Speed Demon 650DP, mechanical secondary
Fabbed aluminum valve covers
Billet alternator bracket
Edelbrock water pump
Mac P shorty headers
Mac Pro chamber
Mac Pro dumps
UPR Pollished underdrive pulleys
Motorsport 9mm wires
Mallory HyFire 6 ignition
Mallory coil
UPR quadrant, firewall adjuster, cable
Fresh built T5Z
MGW shifter
FRPP King Cobra clutch
FRPP aluminum DS
New TCI Line lock
Sumped tank with a Holley Black pump
Weld Draglites 15x3.5 and 15x8 with 26X 10.5 et streets
Subframe connectors
4 point roll bar
Complete upr pro rear suspension (solid double adj uppers and lowers)
SOS anti roll bar
Autoguage tach with shift light
Autometer guages oil,water,fuel
Lakewood 90/10's and 50/50's
Moroso drag springs front and back
Eaton center section with 3.73 gears
31 spline Moser axles
Aluminum radiator w/ electric fan

tmcc02gt

very nice, looks like a sleeper.

Shelby_Daytona

Looks like a fun project car, should be capable of a lower 1/4 next time you take it to the track, if everything is running right, nice car!

Shelby_Daytona

I have to disagree with that, there is a whole world of aftermarket stuff available for all years of Mustang, especially the fox-bodies, so with just that cowl hood I would be skeptical as to its 'sleeper' look, definitely a nice car however.

badass84gt

Thanks!!! The car was in no way built as a sleeper and just with the idle you can tell its got alittle something under the hood. It is an extremely fun car and alot of blood sweat and tears went into the build in a very short amount of time. All the bugs are getting worked out and the real fun will start!!!

badass84gt

Just alittle update since I havent been on here in awhile. Most of the issues are fixed and will be also swapping to stud mount roller rocker this week. As of now it has now gone 12.90s at 104 and I thinks theres still more in her, we will see once the rockers are swapped and everything is adjusted right. I also got a Innovate Motorsports wideband thats going in soon so tuning will be 100% dialed next time she goes to the track.

stagnet04

I love seeing cars like this....