- View Profile: iROK24/7

Go Back > Members

iROK24/7 iROK24/7 is offline

2nd Gear Member

Visitor Messages

Showing Visitor Messages 1 to 8 of 8
  1. StangStig
    02-24-2012 05:09 PM
    Hi ... I am in the same boat as the previous poster. I could use the pictures of the famous "silencer" Hurst fix. Could you email them again (
  2. jasonpell1117
    03-24-2011 02:20 PM
    Hello, I have recently installed a hurst shifter on my mustang and found your post about a fix for the rattle. The pictures seem to no longer be there. Could you send me some pictures as I am having a little trouble understanding the installation of your proposed fix. Thanks a bunch!
    I tried to do the install using the dimensions you gave, but the OD and ID seemed to large. I am trying to figure out where the flex hose is supposed to mount and push against the linkage. Please email me the pictures you had posted on a thread. email address is thank you!
  3. iROK24/7
    12-23-2009 09:40 AM

    It continues to work despite the wildly varying temperatures of New England. It's a simple fix and you can't beat the price!

    Best of luck to ya Jon - Rick
  4. nuts4stangs
    11-19-2009 06:22 PM
    Hi Rick, Well I think it is a year since you came up with Hurst Silencer. I am getting ready to install one in my car. Got the silencer ready. My question is. Since it has been a while Is your silencer still working or does it need to be replaced periodically?? Thanks Jon
  5. wingman75
    01-17-2009 11:15 AM
    Rick, thanks. Looks like we think alike.
  6. ScottishDoc
    01-13-2009 07:13 PM
    Hey Rick, I just got a Pony, its a 2007 and hardly has 12,000 miles on it. The first performance upgrade I got was the HURST short throw. I noticed you had a solution to the rattle and i had a couple questions about it before i go rummaging around under the stang.
    I understand the part about wrapping the long arm that connects to the tranny. So I would start that around 6" away from the transmission on that arm. Then i would take the end of that tubing and wedge it between the top side of that plate that the ball and socket are mounted to and the underside of the car? and thats it?
    I just really cant stand this rattle anymore, its driving me INSANE haha.
  7. iROK24/7
    12-24-2008 12:56 PM
    Hey Mellow... no that wasn't me, I've lived in New England most of my life except the 5 years I spent in Europe. You CA guys are cool in my book; I was a motocross racer in my teens and it seemed as if all the action was in SOCAL..and now I notice a LOT of Mustang enthusiasts out there! Thanks for droppin' me a line.. I've always admired your car! KUDOS!
    12-24-2008 11:31 AM
    Rick, did you ever live in SOCAL. I could swear I met you over at wheel warehouse this time of the year 2 years ago.

About Me

  • Personal Information
    First Name
    Last Name
    Boston, MA
    Nuclear Engineer
    Fast Cars & Screaming Guitars!
  • Vehicle Information
    Year, Make, Model
    2005 Black V6 Mustang and Vista Blue 2006 Vortech Supercharged Roush
    Engine Size
    5 speed
    Forced Induction Setup
  • Signature

    "The Monsta": Vista Blue '06 Vortech Supercharged Stage 1 ROUSH: 505 RWHP 457 RWTQ & WAY too many mods to list!

    Daily Driver: Black '05 V6 Mustang 4.0 w/ VMP 93 Tune, CAI, ROUSH Extreme lowering springs, ROUSH hood w/scoop, GT Muffler, Leather, GT Front Fascia & Grille w/Fogs, 8.8"/3.73 rear end, Clear corners, T-handle Hurst w/silencer .


Total Posts
Visitor Messages
General Information
  • Last Activity: 09-21-2011 05:17 AM
  • Join Date: 09-15-2008
  • Referrals: 0


Showing Friends 1 to 3 of 3

All times are GMT -5. The time now is 08:59 AM.

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company