PowerHouse 4.0 to 5.4 3V Turbo project - Phase 1 Complete
06-22-2008, 05:29 PM
#12
6th Gear Member
Thread Starter
Join Date: Jul 2005
Posts: 5,172
RE: PowerHouse 4.0 to 5.4 3V Turbo project - Phase 1 Complete
As for the numbers, Mike left a lot of timing out of the car, but its making (DJ numbers):
461 rwhp / 565 rwtq
The tune, is super super safe. I wanted Mike to add timing, but now thinking we best not till we shake it down a few times at the track. Besides, I'm tired of breaking the damn thing, something safe works for me...till I forge the bottom end. And also, I don't have a dyno sheet. I haven't had a dyno sheet printed out since I was 11 psi I think. I just have him tune it, and then take it to the track and look at the ET and MPH.
461 rwhp / 565 rwtq
The tune, is super super safe. I wanted Mike to add timing, but now thinking we best not till we shake it down a few times at the track. Besides, I'm tired of breaking the damn thing, something safe works for me...till I forge the bottom end. And also, I don't have a dyno sheet. I haven't had a dyno sheet printed out since I was 11 psi I think. I just have him tune it, and then take it to the track and look at the ET and MPH.
06-22-2008, 06:01 PM
#15
6th Gear Member
Thread Starter
Join Date: Jul 2005
Posts: 5,172
RE: PowerHouse 4.0 to 5.4 3V Turbo project - Phase 1 Complete
ORIGINAL: 28HopUp
She's a BEAST!!! Congrats on getting Stella back.I'm clear for meeting up with you Wednesday evening for those shakedown runs.
She's a BEAST!!! Congrats on getting Stella back.I'm clear for meeting up with you Wednesday evening for those shakedown runs.
06-22-2008, 06:02 PM
#16
6th Gear Member
Thread Starter
Join Date: Jul 2005
Posts: 5,172
RE: PowerHouse 4.0 to 5.4 3V Turbo project - Phase 1 Complete
ORIGINAL: forensicsteve
Powerhouse Rocks...got to love that torque/hp contrast. Really exciting build....for both of you
Powerhouse Rocks...got to love that torque/hp contrast. Really exciting build....for both of you
06-22-2008, 06:12 PM
#17
3rd Gear Member
Join Date: Dec 2006
Location: California
Posts: 500
RE: PowerHouse 4.0 to 5.4 3V Turbo project - Phase 1 Complete
i really wish i lived closer so i can hear how this beast runs.
not many S197 mustangs in san diego are even close to pushing out these numbers
not many S197 mustangs in san diego are even close to pushing out these numbers
06-23-2008, 02:00 PM
#18
MF Administrator
Join Date: May 2005
Location: South Carolina
Posts: 8,191
RE: PowerHouse 4.0 to 5.4 3V Turbo project - Phase 1 Complete
ORIGINAL: rygenstormlocke
It's on Bill. Beers on me man.
ORIGINAL: 28HopUp
She's a BEAST!!! Congrats on getting Stella back.I'm clear for meeting up with you Wednesday evening for those shakedown runs.
She's a BEAST!!! Congrats on getting Stella back.I'm clear for meeting up with you Wednesday evening for those shakedown runs.
06-23-2008, 03:10 PM
#19
6th Gear Member
Thread Starter
Join Date: Jul 2005
Posts: 5,172
RE: PowerHouse 4.0 to 5.4 3V Turbo project - Phase 1 Complete
ORIGINAL: 28HopUp
Sounds good. I am SO STOKED about seeing you and Stella at the track. Hope theydo a good job prepping thetrack! My new SPEC2 clutch and Fidanza alum flywheel should be well broken in by Wednesday, so I'd like to see my 60's in the 1.8xx range.
ORIGINAL: rygenstormlocke
It's on Bill. Beers on me man.
ORIGINAL: 28HopUp
She's a BEAST!!! Congrats on getting Stella back.I'm clear for meeting up with you Wednesday evening for those shakedown runs.
She's a BEAST!!! Congrats on getting Stella back.I'm clear for meeting up with you Wednesday evening for those shakedown runs.