5.0 coyote swap into 2006 GT , Saleen , police clone?
#153
I've been wanting to do the 5.0 swap in mine since I bought it. Always heard it was next to impossible to do though. This thread gives me hope that it is something I can do myself. Damn fine job on the conversion. I bet that paint looks sick in the sun.
#154
2nd Gear Member
Thread Starter
Join Date: Aug 2010
Location: Pawleys Island , South Carolina
Posts: 172
Thanks man , yeah she sparkles and shines in the sun. Its def not hard swap to do , biggest hurdles would be finding a motor for a deal and then getting the FRPP control pack and then deciding what rack to go with or using the acc brackets available, other than that plain sailing
#155
2nd Gear Member
Thread Starter
Join Date: Aug 2010
Location: Pawleys Island , South Carolina
Posts: 172
Well the project took another turn , I snagged a 2014 5.0 front bumper and hood CHEAP , so I bought 2 aftermarket front fenders and am doing the front swap. Im blending the 2010 up fenders into mine so it all meshes.
#156
OMFG! Please detail what you do!
I have so much wanted to do this for a 2010-2012 onto my 09. Other than the fender flair it does not look too bad right off! I was thinking it might be easier to cut the 05-09 fender a bit in the front to fit the 10-12 front fascia. Or, maybe cut and swap the flairs.
I assume the 10-12 bolt points are no different than the 13-14?
Damn, you are the coolest Mustang guy ever.
I have so much wanted to do this for a 2010-2012 onto my 09. Other than the fender flair it does not look too bad right off! I was thinking it might be easier to cut the 05-09 fender a bit in the front to fit the 10-12 front fascia. Or, maybe cut and swap the flairs.
I assume the 10-12 bolt points are no different than the 13-14?
Damn, you are the coolest Mustang guy ever.
#158
OMFG! Please detail what you do!
I have so much wanted to do this for a 2010-2012 onto my 09. Other than the fender flair it does not look too bad right off! I was thinking it might be easier to cut the 05-09 fender a bit in the front to fit the 10-12 front fascia. Or, maybe cut and swap the flairs.
I assume the 10-12 bolt points are no different than the 13-14?
Damn, you are the coolest Mustang guy ever.
I have so much wanted to do this for a 2010-2012 onto my 09. Other than the fender flair it does not look too bad right off! I was thinking it might be easier to cut the 05-09 fender a bit in the front to fit the 10-12 front fascia. Or, maybe cut and swap the flairs.
I assume the 10-12 bolt points are no different than the 13-14?
Damn, you are the coolest Mustang guy ever.
#159
Thank You!
Last edited by tbear853; 01-12-2014 at 11:48 AM.