2010 6.2L 400HP
05-16-2008, 10:22 AM
#22
Mach I Section Moderator
Join Date: Mar 2007
Location: round abouts these parts
Posts: 7,140
RE: 2010 6.2L 400HP
uses a bigger bore to bring the 5.0 displacement as opposed to using the stroke alone, we are much, much better off
uses the 3.7 stroke to achieve the 5.0 displacement
configuration and 3.7 bore, stoked out with the 3.7 stroke (that Saleen and others obviously uses to date) ultimately displacing about 322 CID
the info below is as new as this month
Sounds like the bore will be in the 3.6x range as well... unfortunately
No matter how many times we tell them it won't be 3.7" they won't listen.
92.2mm - 3.63"
92.2mm - 3.63"
If they are going for the classic 302 cubic inches it would be 92.20mm x 92.70mm = 4.951L, if they are going for a true 5L then it would be 92.20mm x 93.62mm = 5.000L
Thread
Thread Starter
Forum
Replies
Last Post
Galactic
Archive - Mustangs For Sale
10
04-29-2019 02:56 PM