5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
#1
5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
2 months ago, a combination of power, extremely old and dry rotted tires, and slight morning dew caused me to slide my mustang off into a ditch. Unfortunately, said ditch was about 4 feet deep and only 4 feet wide. As you can guess, this did some serious damage to the front end. The car is pretty much totaled. However, the damage is pretty much contained in the very front end of the car. Everything from the radiator back suffered no real damage and is still in nearly perfect condition.
Here is a list of all the parts that have been put on the car at one point or another:
Kenny Brown subframe connectors
Maximum Motorsports strut tower brace
Maximum Motorsports caster/camber plates
Maximum Motorsports brake upgrade kit
Maximum Motorsports lower control arms
Tokico Premium shocks and struts
Eibach Pro-kit 1.5” lowering springs
Ford Motorsport aluminum driveshaft
PRO 5.0 shifter
Trick Flow Twisted Wedge aluminum heads
Trick Flow hydraulic roller cam
Trick Flow roller rockers
Trick Flow Street Heat intake manifold
Flowmaster American Thunder cat-back with stainless tailpipes
BBK jet-hot coated longtube headers
BBK off-road H-pipe
BBK cold air induction with K&N filter
Kirban adjustable fuel pressure regulator
130 amp alternator upgrade
Ford Motorsport distributor cap and rotor
Ford Motorsport 9mm spark plug wires
Accel fuel pressure gauge
The H/C/I kit was installed relatively recently and has less than 1500 miles on it.
This car has been sitting in my garage over the past two months as i contemplated its many concievable fates, but right now i just want to move on. I'm only asking $1500(obo) for the whole car, though the buyer must be able to haul away the car as it sits now. I live in Springfield Missouri.
If you have any questions at all, feel free to PM me.
EDIT: To clear things up, I would like to reiterate the fact that i am selling the car as a whole. Anyone interested in the car would have to be able to transport it as a whole as well. At this time I'm not parting out the car.
Here is a list of all the parts that have been put on the car at one point or another:
Kenny Brown subframe connectors
Maximum Motorsports strut tower brace
Maximum Motorsports caster/camber plates
Maximum Motorsports brake upgrade kit
Maximum Motorsports lower control arms
Tokico Premium shocks and struts
Eibach Pro-kit 1.5” lowering springs
Ford Motorsport aluminum driveshaft
PRO 5.0 shifter
Trick Flow Twisted Wedge aluminum heads
Trick Flow hydraulic roller cam
Trick Flow roller rockers
Trick Flow Street Heat intake manifold
Flowmaster American Thunder cat-back with stainless tailpipes
BBK jet-hot coated longtube headers
BBK off-road H-pipe
BBK cold air induction with K&N filter
Kirban adjustable fuel pressure regulator
130 amp alternator upgrade
Ford Motorsport distributor cap and rotor
Ford Motorsport 9mm spark plug wires
Accel fuel pressure gauge
The H/C/I kit was installed relatively recently and has less than 1500 miles on it.
This car has been sitting in my garage over the past two months as i contemplated its many concievable fates, but right now i just want to move on. I'm only asking $1500(obo) for the whole car, though the buyer must be able to haul away the car as it sits now. I live in Springfield Missouri.
If you have any questions at all, feel free to PM me.
EDIT: To clear things up, I would like to reiterate the fact that i am selling the car as a whole. Anyone interested in the car would have to be able to transport it as a whole as well. At this time I'm not parting out the car.
#2
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
very interested in the strut brace, and LCAs. Can you shoot me a picture of both, trikystang@yahoo.com. Also are they the weight jacker LCAs, with the adj. perch? And does the strut brace have the bend in it to fit around a supercharger? Please let me know. Thanks in advance
#3
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
i give you 1200 shipped to 90605
#5
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
how much for the mm caster plates, lower control arms and sub frames...shipped to ca 91104
#6
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
you said 1500 for the whole car all the parts listed above included have cash in hand post a reply
#7
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
interested for the heads and intake... pm me
#8
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
Interested in the cam. How much shipped to cresco, iowa 52136.
#9
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
interested in shifter and headers
#10
RE: 5.0 Foxbody w/ H/C/I kit and much more. For sale for parts. Must sell soon.
Are those shocks and srtuts adjustable?