uedlose

Year: 1987
Make: Ford
Model: Mustang
Price: $3500
Mileage: 2147483647
Color: blue
Private or Dealer Listing: Private Listing
Location (State/Prov): WV

Got the car on a deal from a old customer. Car has been 7.00 in the 1/8. Start with the body is ROUGH!! and it needs a block I do believe it is losing oil pressure when it gets hot and has a bad shake in it. no knocks. the engine is a 306 with dss forged flat top pistons with less then 10k miles e-cam p-heads roller rockers ported cobra intake 95mm pmas mass air bigger T/B think it is a 70mm. has a Procharger p600b s/c on it with a 3in intercooler set up for 14 psi. have the upper 17psi pulley for it also. 42# injectors Procharger pump outside and a 255 in the tank. has a c4 with a redneck 4000 stall w/balloon plates full manual valvebody P/A reverse pattern with a Hurst shifter mounted in stock location with a tci sfi flex plate and TCI after market servo. trans may have 10k miles on it and is a real nice part with extra clutch's and Kevlar bands. I know I built it for that matter I did the whole car for the guy. Has strange drag struts on the front. subframe connectors. some cheap glass hood on it also AGAIN THE BODY IS ROUGH. It has shorty headers offroad h-pipe and flow master. Car has welds all the way around it also. 4:10 rear gears and he welded up the center section. also has MSD 6 box on it and MSD coil. The car comes with a standard bore Mexican block. it also comes with a used 331 stroker kit that will need 2 pistons and one rod. and a full roll bar kit that has rust on it and will need lots of cleaning but it is all there and never installed. Car hooks great and runs real good for what was there and is a super sleeper with the body the way it is. Looking to get 3500 for all of it OBO cash talks. Car hear the car run. May part car if there is enough interest