S> Zex Wet Nitrous Kit
07-02-2009, 06:35 PM
#1
5th Gear Member
Thread Starter
Join Date: Aug 2005
Location: Whitehall, Michigan
Posts: 2,638
S> Zex Wet Nitrous Kit
Well, time for me to sell the nitrous kit that has been on my car unused for the longest time. I'm moving on to bigger and better things (yay boost!)
The kit is a Zex wet kit ($670), the exact kit can be found here:
http://www.compperformancegroupstore...gory_Code=Ford
The kit is used, but has not seen much use. I purchased it new in fall of 07 and it has had about 35lbs of nitrous through it in that time. I have all the parts that originally came with the kit, all of the jets (75, 100, and 125 jet pairs), the wiring that comes with the kit hasn't even been cut - I coiled the extra.
There's nothing wrong with the kit, I just don't need it any more!
I didn't buy any extras, so what you see on Zex's site is what I have:
-Controller with fuel pressure safety switch
-10 lb. bottle
-Jets and nozzle
-All stainless steel lines
-Switch, wiring and mounting hardware (system is activated by TPS voltage - AKA WOT switch)
The only negative I can see is the finish on the bottle is a little scuffed from the mount that comes with the kit. Pictures available upon request - I'm just not feeling well this second and don't want to get out to take some pictures haha
Pictures now in post 8
Price: $400 OBO - I'll pay shipping!
Send me a PM, thanks!
The kit is a Zex wet kit ($670), the exact kit can be found here:
http://www.compperformancegroupstore...gory_Code=Ford
The kit is used, but has not seen much use. I purchased it new in fall of 07 and it has had about 35lbs of nitrous through it in that time. I have all the parts that originally came with the kit, all of the jets (75, 100, and 125 jet pairs), the wiring that comes with the kit hasn't even been cut - I coiled the extra.
There's nothing wrong with the kit, I just don't need it any more!
I didn't buy any extras, so what you see on Zex's site is what I have:
-Controller with fuel pressure safety switch
-10 lb. bottle
-Jets and nozzle
-All stainless steel lines
-Switch, wiring and mounting hardware (system is activated by TPS voltage - AKA WOT switch)
The only negative I can see is the finish on the bottle is a little scuffed from the mount that comes with the kit. Pictures available upon request - I'm just not feeling well this second and don't want to get out to take some pictures haha
Pictures now in post 8
Price: $400 OBO - I'll pay shipping!
Send me a PM, thanks!
Last edited by ShadowDrake; 07-05-2009 at 04:02 PM.
07-02-2009, 06:46 PM
#2
5th Gear Member
Join Date: Dec 2006
Location: North Carolina
Posts: 2,223
Will this work on my V6, I mean the connections and all, and is this everything included?
07-02-2009, 08:12 PM
#3
5th Gear Member
Thread Starter
Join Date: Aug 2005
Location: Whitehall, Michigan
Posts: 2,638
It will work just fine... everything is included and was left as is. You could follow the instructions that came with the kit and install it without hitch.
As far as electrical connections are concerned, there are only a couple...
Positive and negative which runs through the switch (with a fuse, also already there), and one wire connects to the signal wire on your TPS - for the WOT switch. I am not sure which wire you need to tap but I can find out using my friend's 00 v6.
Apart from that you need to get fuel to it, there is a kit zex has which lets you use the schrader valve on your fuel rail... I don't have it - it didnt come with my kit and my fuel rails dont even have a schrader valve. You can also cut and put a t-fitting into the fuel line. SOunds scary but it isn't bad.
So yes, it will work just fine, everything is here, or I could help you locate extras to make it simpler. All connections will be simple
Excuse any typos... typed this up from my phone.
Last edited by ShadowDrake; 07-02-2009 at 08:33 PM.
07-02-2009, 08:34 PM
#4
5th Gear Member
Thread Starter
Join Date: Aug 2005
Location: Whitehall, Michigan
Posts: 2,638
Hey!
Make this kit more complete! Look what just popped up in the other section:
https://mustangforums.com/forum/s197...le-heater.html
That will work with this kit!
Make this kit more complete! Look what just popped up in the other section:
https://mustangforums.com/forum/s197...le-heater.html
That will work with this kit!
07-03-2009, 04:32 PM
#6
5th Gear Member
Thread Starter
Join Date: Aug 2005
Location: Whitehall, Michigan
Posts: 2,638
Pics to.. game_overz28@yahoo.com
The kit is still in the car (ah, laziness), so I'll do my best. If I get someone really looking to buy it I'll pull it out and take better pictures.
07-05-2009, 03:05 PM
#7
3rd Gear Member
Join Date: Feb 2006
Location: Muskegon, MI
Posts: 538
this kit is super legit, I've witnessed its uber sweet power in the passenger seat.
buy it MEOW
buy it MEOW
07-05-2009, 03:55 PM
#8
5th Gear Member
Thread Starter
Join Date: Aug 2005
Location: Whitehall, Michigan
Posts: 2,638
Pictures are here! As I said, the kit is still in the car but as soon as someone shows some serious interest I'll remove it and take better pictures simply by request.
07-05-2009, 05:38 PM
#9
3rd Gear Member
Join Date: Feb 2006
Location: Muskegon, MI
Posts: 538
purple bottle = +18 rwhp
07-11-2009, 02:53 PM
#10
5th Gear Member
Thread Starter
Join Date: Aug 2005
Location: Whitehall, Michigan
Posts: 2,638
Bump to the top.