Advice for building S/C 4.6
02-08-2017, 08:30 PM
#1
Thread Starter
Join Date: Feb 2017
Location: Georgia
Posts: 1
Advice for building S/C 4.6
I need to know how to build a 600 plus hp streetable emmision friendly motor. I have contacted MMR but no response. I know its a kinda broad question but i need a jumping off point. Thanks
03-01-2017, 10:12 PM
#2
Join Date: Feb 2017
Location: California
Posts: 5
If you're talking about a 2v then I wouldn't pass 400-450hp without swapping internals and if its a 3v I wouldn't wanna even take it up to 600 without forged internals. So you need to think of all supporting mods for the power. Upgrade internals, driveshaft, rear end, etc. With that said throw some forced induction in the mix and you got yourself a streeetable, emission friendly 600+hp tire frying machine.
