Cobra R deep dish on 70 Cougar.
#1
Cobra R deep dish on 70 Cougar.
Lance wanted to see what those looked like on the old school rides.
Those are made for 94/04 cars, so it's not a direct bolt on on a classic Ford.
I managed to make the 10.5 at the back, fit perfect...
1/4 from the leaf springs and less than that from the outside sheet metal.
The front is another story though, as I'm running a 1.5" spacer on those pictures but have now a 2" to make up for the small offset.
Keep in mind that I have a 71/73 rear end assembly on that car because it's 2" wider than the 1970 one. Those wide wheels with 315/34x17 Nitto would not fit on the original set-up.
They would touch the leaf springs.
Thanks Lance.
Those are made for 94/04 cars, so it's not a direct bolt on on a classic Ford.
I managed to make the 10.5 at the back, fit perfect...
1/4 from the leaf springs and less than that from the outside sheet metal.
The front is another story though, as I'm running a 1.5" spacer on those pictures but have now a 2" to make up for the small offset.
Keep in mind that I have a 71/73 rear end assembly on that car because it's 2" wider than the 1970 one. Those wide wheels with 315/34x17 Nitto would not fit on the original set-up.
They would touch the leaf springs.
Thanks Lance.
Last edited by pascal; 10-04-2009 at 06:46 PM.
#4
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
3
11-10-2015 11:39 AM
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM