1999 Cobra TREMEC T-45 w/driveshaft

Reply Subscribe

Thread Tools

Search this Thread

08-23-2006, 09:02 AM

sn95stroker

Thread Starter

Join Date: Aug 2006

Posts: 6

1999 Cobra TREMEC T-45 w/driveshaft

Hello Everyone,
I have for sale a very nice TREMEC T-45 5-Speed transmission and a matching driveshaft from my 1999 Mustang Cobra 4.6 4V. It has a little over 36,000 miles on it. I upgraded the engine to a blown 4V from a 2004 and it came with a transmission and that is the reason for the sale. It comes with the bellhousing for all 4.6 motors, clutch cable, clutch fork, wiring harness, and shifter. It has the speed sensor gear for the 3.27 rear end and it has redline gear oil in it. It is located in San Diego, California. I can crate it and drop it off at the freight forwarding place of your choice or you can pick it up. Greyhound Bus lines will ship to almost anywhere in the US for about $1/pound. Please make me an offer!

[IMG]local://upfiles/46878/619C21A8CE44458482F7E8A78F869EF9.jpg[/IMG]

[IMG]local://upfiles/46878/2858984DD3474C92A4C6B85F37985DBE.jpg[/IMG]

09-04-2006, 01:10 PM

svt99redcobra

3rd Gear Member

Join Date: Jul 2006

Location:

Posts: 646

RE: 1999 Cobra TREMEC T-45 w/driveshaft

how much, mine just crapped out on me. I can arange for yellow freight to pick it up.

09-04-2006, 03:15 PM

DILO2001GT

I ♥ Acer

Join Date: Nov 2004

Location:

Posts: 2,781

RE: 1999 Cobra TREMEC T-45 w/driveshaft

would this fit to a GT?

09-04-2006, 07:39 PM

sn95stroker

Thread Starter

Join Date: Aug 2006

Posts: 6

RE: 1999 Cobra TREMEC T-45 w/driveshaft

$500.00

09-04-2006, 07:41 PM

sn95stroker

Thread Starter

Join Date: Aug 2006

Posts: 6

RE: 1999 Cobra TREMEC T-45 w/driveshaft

Yes it will fit the GT. You have to use the Cobra driveshaft that I am including with this transmission.
Thanks

09-05-2006, 05:02 AM

DILO2001GT

I ♥ Acer

Join Date: Nov 2004

Location:

Posts: 2,781

RE: 1999 Cobra TREMEC T-45 w/driveshaft

so this would be all i need to swap my auto for a stick or would i need more?

09-05-2006, 07:31 AM

sn95stroker

Thread Starter

Join Date: Aug 2006

Posts: 6

RE: 1999 Cobra TREMEC T-45 w/driveshaft

Well, you are going to need a few more items such as at least:
1. Flywheel
2. Pressure Plate
3. Clutch Disc
4. Clutch Pedal
5. The shifter sorrounding w/booth for your center console
6. Possibly a different transmission mount?

I will include a standard Mustang shift **** along with the following:
1. Transmission w/4.6L Bellhousing
2. Cobra Driveshaft
3. Cobra clutch cable
4. Cobra shifter

I have never done a awap from auto to manual. I am sorry, my knowledge is very limited in this subject area.
You should do some research and ask people that have done a swap.
Thanks

09-07-2006, 02:11 AM

sn95stroker

Thread Starter

Join Date: Aug 2006

Posts: 6

RE: 1999 Cobra TREMEC T-45 w/driveshaft

I am willing to take $400.00, I will not refuse a good offer.

09-07-2006, 02:56 AM

socal96gt

2nd Gear Member

Join Date: Jul 2006

Location:

Posts: 166

RE: 1999 Cobra TREMEC T-45 w/driveshaft

i live in los angeles i could pick it up from you, i have a 96 gt w/ 4.10's (i have the speed gear) and a ford
racing aluminum driveshaft will my aluminum shaft still work with this trans? pm me, thanks alot, Ben

09-07-2006, 04:41 AM

#10

sn95stroker

Thread Starter

Join Date: Aug 2006

Posts: 6

RE: 1999 Cobra TREMEC T-45 w/driveshaft

Yes you can pick it up. Yes your drive shaft will work with it but you have to use the yoke from my drive shaft and put it on your drive shaft, it is a simple procedure.