NeoTokyo

Here is a list of what I have for sale, if you dont see somethingthat you need then just ask. Shoot me a PM if you are interested in anything.

***Note: All Mach1 parts are from a Ford Test car that was used for Diagnostic and rear crash test, parts are almost new.***

*99-01 & 03-04 Dual blade TB (03 Mach1)
*03-04 Mach1 Injectors (Diag time only) ~SOLD~
*03-04 Mach1 starter Automatic flywheel (Used for engine diag once)
*03-04 Mach1Complete shortblock 6blt cast crank 0 miles, diag.
*03-04 Engine wiring harness Some cut wires
*03-04 Mach1 Power steering plstic canister
*03-04 Mach1 stockexhaust manifolds
*03-04 Mach1 IFS complete w/ rack, K-member,shocks, springs, spindles, swaybar,all there except rotors and cals. ~SOLD~
*03-04 Mach1 PS Rack and steering shaft
*03-04 Mach1 A-Arms

Thats all I am willing to sell for the Mach1 stuff for now. I have way more that may come up depending if I need it for the build or not.


*1995 Cobra rear brakes ~SOLD~
*Complete or parted (Your choice) 1995 7.5" rear end w/ suspension. 2.73 gears. (No Brakes)
*8.8" 2.73 Ford ring and pinon
*1995 Mustang V6 T5 driveshaft
*1995 Mustang K-Member (Idea for 5.0L swaps from 4cyls) bare or make an offer for the V6 stuff that is on it too.
*1995 V6 Front brakes. ~SOLD~
*1995 GT or Cobra quad shocks (Stock)
*1995 V6 ManualPCM
*Anything you may need from a 1995 V6 3.8L (One of the heads or both are cracked, water in oil -Milkshake-)
*1995 Mustang T5 V6 trans. Less than 5000mi on, bought new from Ford.

I have some other parts that may come up later.

-Eric-

dhuskers_11

i was wondering if you would be able to sell me the headlight harnesses out of the mach?

NeoTokyo

All of the body and wiring peices are gone with the exception of the engine wiring harness, im sorry.

NeoTokyo

I gotta sell this stuff soon so I am taking all reasonable offers.
The engine swap on my wifes 96' is broken the bank and I am short on rent, utilities and a few other small bills.

So great time for somone to get a deal! Just make your offer and I will ask the wife, I have to have an offer first though to give her.

badboystangGT

could you just sell me the rack and pinon?

5speedstang

do you have shocks and struts off the mach 1?

NeoTokyo

I used the shocks and strusts on my wifes 96' Sorry.
Also it is very worth it to get a set along with the prings, the performance gains are great, it handles so much better.

The springs were manufactured by Eibach for Ford so you know its good!

NeoTokyo

-bump-

NeoTokyo

~Bump~

VOZO112

if you still have the power seat rail out of the 3.8l mustang could you let me know