Procharger 94-95 GT... Aluminum Heads.. Etc...
10-28-2007, 07:18 AM
#1
3rd Gear Member
Thread Starter
Join Date: Dec 2005
Location:
Posts: 759
Procharger 94-95 GT... Aluminum Heads.. Etc...
P1SC Procharger Intercooled System with HKS Bypass Valve for 94-95 GT. The head unit will lose a little bit of oil, just enough for dirt to collect on it so you can see it. It has been ran over a year and level hasn't moved off of full. So its an extremely small leak that hasn't gotten worse in a year. This leak from what i hear is common. I'm asking $2000 for the setup with fmu or 2200 with Bosch 30lb injectors and Granatelli Calibrated Mass Air. Kit comes with brackets, idlers (with new bearings), intercooler, bypass valve and all the piping and hoses. Made 11 pds of boost on my car.
PBM Strike Force Aluminum Heads. 2.02, 1.60 valves. Unassembled. Only need the valve spring caps and studs. They have 200 intake runners. Triple valve springs. Viton seals. Stainless steel valves. $750
Trick Flow Track Heat Intake. Upper is custom painted. Done professionally. Comes with 1" spacer to clear tall valve covers. It will also have all the bolts to install. $450
4.6 Shortblock from 96 Mustang. $75
Aeromotive Fuel Pressure Regulator. 94-95 Fuel Rail. Used two weeks. $75
Steeda #19 Camshaft. Used two weeks. $125
Granatelli Mass Air Meter with 30lb injectors $175
E6 Heads. Came off running motor. $50
Set of 95-96 Stock Pony Wheels. Good tires on them. $200
Edelbrock Performer RPM 4barrel intake. Never ran. $150
Brand New HolleyDual Line Carb. Part # 0-80670. Still in the box. 670 Street Avenger. Comes with brand new fuel line connector for the bowls, still in the box. $300
302 long block from crown victoria. Appox 100,000. Ran when pulled. $75
AOD Transmission. Needs Rebuilding. $25
Stock H.O Intake from 89. Comes with fuel rails. $50
19 lb injectors. Stock. One missing cap off the end of it. $20
I have all the rocker arms and stock push rods from heads pulled. Let me know if you need any.
Also have a couple timing covers. $20 each
Factory 2 Barrel Intake. $20
That's all i can think of right now, i will be adding more over the next few days. Please email me on all offers and needs. My email is k_crockett@hotmail.com... thanks
11-01-2007, 11:35 AM
#6
3rd Gear Member
Thread Starter
Join Date: Dec 2005
Location:
Posts: 759
RE: Performance Parts... Everything Must Go!!!
Everyone seems to really like those wheels... They took a whole lot of research to ever get them on the car... I guarantee there isn't another set on a 79 up car... I had a hundred people tell me they wouldn't work, and the tire sizes were hell to deicde... But anyways, sold the car and let them go with it... So i don't have them any more...
