Kenne Bell 2.6 supercharger
11-25-2010, 06:58 AM
#11
1st Gear Member
Thread Starter
Join Date: Jun 2007
Location: NC
Posts: 114
Category: Engine - Power Adders
Price: $2800
Private or Vendor Listing: Private Listing
Part fits: S197
Location (State/Prov): NC
Item Condition: Used
11-27-2010, 12:50 PM
#12
5th Gear Member
Join Date: May 2007
Location: Central Texas
Posts: 2,388
No problem. It can be a real challenge trying to figure out what you need in such a partial kit. But I did leave at least one more thing out:
- the idler pulley and pulley mounting bracket, which also holds the alternator in place; this is a rather critical couple of pieces!!!
- the idler pulley and pulley mounting bracket, which also holds the alternator in place; this is a rather critical couple of pieces!!!
11-28-2010, 08:55 PM
#13
1st Gear Member
Thread Starter
Join Date: Jun 2007
Location: NC
Posts: 114
well gents I start clearing tomorrow so time is getting really short and since I dont have any interest on this thing I will probably put it on fleabay
11-29-2010, 07:54 PM
#14
1st Gear Member
Thread Starter
Join Date: Jun 2007
Location: NC
Posts: 114
Im picking up a new pulley and some of the bracketry from tx_zstang to make this more of a complete kit
11-29-2010, 11:10 PM
#15
3rd Gear Member
Join Date: Nov 2007
Location:
Posts: 888
If u get that broken bypass thing fixed and lemme know what brackets u get. I will defiantly try to make a deal with you pm me!
11-29-2010, 11:41 PM
#16
5th Gear Member
Join Date: May 2007
Location: Central Texas
Posts: 2,388
FYI, the bypass unit is available from kenne bell. If you have different cams, you'd want to upgrade to the different lower-vacuum unit for better idle stability.
The remaining parts are mostly misc. items you can get from other places, and nothing real expensive. The vacuum control is probably the most expensive missing item. But do a search; somewhere on some forum this year, someone was selling the vacuum control unit at a good price.
The only bracket that's still missing is the alternator/idler pulley bracket.
I've offered to help answer any questions I can about the setup as well (I just installed the same setup, with some modifications, in my car this past August, so it's all still fresh in my mind as to what's all needed to get it installed). So feel free to ask. (I have no affiliation with the seller, just trying to help out a Patriot who's served for our country.)
I may have some other parts available (like the windshield washer reservoir and bracket, belt, and other pulleys for more or less boost) within the next month or two as well. But for now, I'm sending several parts that I'm not using to the seller Tuesday.
The remaining parts are mostly misc. items you can get from other places, and nothing real expensive. The vacuum control is probably the most expensive missing item. But do a search; somewhere on some forum this year, someone was selling the vacuum control unit at a good price.
The only bracket that's still missing is the alternator/idler pulley bracket.
I've offered to help answer any questions I can about the setup as well (I just installed the same setup, with some modifications, in my car this past August, so it's all still fresh in my mind as to what's all needed to get it installed). So feel free to ask. (I have no affiliation with the seller, just trying to help out a Patriot who's served for our country.)
I may have some other parts available (like the windshield washer reservoir and bracket, belt, and other pulleys for more or less boost) within the next month or two as well. But for now, I'm sending several parts that I'm not using to the seller Tuesday.
11-30-2010, 03:39 PM
#17
3rd Gear Member
Join Date: Nov 2007
Location:
Posts: 888
how much is the vacuum control cost?
11-30-2010, 06:05 PM
#18
5th Gear Member
Join Date: May 2007
Location: Central Texas
Posts: 2,388
http://www.kennebell.net/pricelist/pricelist.htm
BV-200, $269. Bypass valve assembly
Idler pulley, $50 or $60.
BV-200, $269. Bypass valve assembly
Idler pulley, $50 or $60.
11-30-2010, 09:13 PM
#19
1st Gear Member
Thread Starter
Join Date: Jun 2007
Location: NC
Posts: 114
5.0 85 GT PM sent
12-21-2010, 07:48 PM
#20
1st Gear Member
Thread Starter
Join Date: Jun 2007
Location: NC
Posts: 114
going to give this thing till the 1st then put it on the bay