Kenne Bell 2.6 supercharger
#31
Category: Engine - Power Adders
Price: $2800
Private or Vendor Listing: Private Listing
Part fits: S197
Location (State/Prov): NC
Item Condition: Used
- the BPV valve assembly vacuum solenoid (part of the unit is there, but the vacuum control part is missing), gasket, and the blue silicon hose and clamps to connect it to the manifold (you can get this direct from KB)
- the IAT sensor (shown broken off in manifold I have totally removed it)
- the adapter that connects the intake plastic pipe to the throttle body, and the couplers and clamps needed to connect it
- windshield washer fluid tank and mounting bracket, and hose for extending the fluid line.
- vacuum hoses
- valve cover breather hoses (for each side; one goes to the intake adapter that isn't shown or is missing, the other goes to the fitting above where the BPV would be)
- fuel rail hose
- MAF connector plug and extension wiring
- intercooler pump relay,wiring and hoses
- boost-a-pump (or duel pump setup) for increased fuel supply capacity
- tune
I have the manifold completely stripped with heat exchanger out because I thouroghly cleaned and painted all the aluminum and it looks great now.
let me know
thanks
Mike
#32
I just bought a partial kit that had much less than this and I am looking at between 1,500-2,000 for the rest of the parts I need. One other handy piece you will need is the 197 page 398 step installation manual (24.00 shipped)
If you commit to purchasing this kit, the first thing you should purchase is the Install Manual, I've been looking through it and writing down each Piece I will need, so when I have my motor torn apart and half way through install, i'm not waiting 5 days for something as simple as the intake runner gaskets.
also take a look at this thred
https://mustangforums.com/forum/4-6l...tercooler.html
i was able to purchase the AFCO dual pass through speedway for $279.00 shipped from their garage sale area.
http://www.speedwaymotors.com/Garage...ger,27478.html
you can also buy that pump on ebay for $85-$120 and the wiring harness for $15 more
kenne bell will charge $225 for the heat exchanger + $90 for the brackets, $150 for the pump not including the wiring harness.
I hope this helps anyone who is looking at buying this kit, I talked to Mike over email, but I ended up having a kit fall into my lap and couldn't pass up the opportunity I was given.
If you commit to purchasing this kit, the first thing you should purchase is the Install Manual, I've been looking through it and writing down each Piece I will need, so when I have my motor torn apart and half way through install, i'm not waiting 5 days for something as simple as the intake runner gaskets.
also take a look at this thred
https://mustangforums.com/forum/4-6l...tercooler.html
i was able to purchase the AFCO dual pass through speedway for $279.00 shipped from their garage sale area.
http://www.speedwaymotors.com/Garage...ger,27478.html
you can also buy that pump on ebay for $85-$120 and the wiring harness for $15 more
kenne bell will charge $225 for the heat exchanger + $90 for the brackets, $150 for the pump not including the wiring harness.
I hope this helps anyone who is looking at buying this kit, I talked to Mike over email, but I ended up having a kit fall into my lap and couldn't pass up the opportunity I was given.
#33
could you possibly send as many pictures as you can to streetballn226@gmail.com
thank you. Also i may have a reasonable offer for you within 2 months from now.
thank you. Also i may have a reasonable offer for you within 2 months from now.
#34
jayy sorry its taken me so long to get back to you could you please send me a PM so we can discuss this further
#37
#38
Guess I failed to read which car the blower was for, I need for a 2v, haha. Revived the thread for you a bit a least.
#40
this thread is back from the dead and Im back from overseas. Now located in southern alabama. shoot me an offer
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM
26, bell, blower, broken, buy, bv200, edge, kb, kb supercharger, kenne, kenne bell, mattkennebellnet, rebuilding, sn95, superchager, supercharger