Kenne Bell 2.6 supercharger
#1
Kenne Bell 2.6 supercharger
Category: Engine - Power Adders
Price: $2800
Private or Vendor Listing: Private Listing
Part fits: S197
Location (State/Prov): NC
Item Condition: Used
Im just looking to get my money out of this blower and that is 2800.00 plus shipping.
Like I said I bought this after I got back from Afganistan and was going to piece it together but after a 4 month Army school and now on orders to go to Korea in January I feel I should sell it and move on.
#2
2nd Gear Member
Join Date: Mar 2010
Location: Camp Lejeune, North Carolina and Fort Lauderdale, Florida
Posts: 470
whats the complete list of what it needs? I'm in Afghanistan as well so it may take a minute to email you back. I just roger'd up on a Novi...i'm not gonna back out on the guy but I may sell that one and use the KB if it doesn't take too much to piece it together.
#3
to be honest Im not really sure Mike from KB was supposed to send me a list and prices but hasnt gotten back to me yet. I know for sure some 39lb injectors a intercooler pump and hoses and some type of fuel system upgrade. Im just trying to get it gone before the first of the year because I fly on the first. Sorry I cant be of more help let me know.
#4
I'm a KB owner...I have one on my '03 mach1. The folks there have been
honest with me every step of the way...
They have a new web-site at :
http://www.kennebell.net/KBWebsite/H...s/Homepage.htm
I'd suggest giving them a look, or contact Matt at Kenne Bell here:
matt@kennebell.net
Larry
honest with me every step of the way...
They have a new web-site at :
http://www.kennebell.net/KBWebsite/H...s/Homepage.htm
I'd suggest giving them a look, or contact Matt at Kenne Bell here:
matt@kennebell.net
Larry
#5
so that is the blower that douche was selling...sorry he got you.
you have any pictures of the rotors? interested, but worried at how the intercooler is chewed up and the bent pulley. is the shaft straight?
you have any pictures of the rotors? interested, but worried at how the intercooler is chewed up and the bent pulley. is the shaft straight?
#6
Tylus yeah this is the one he sold me, I just haven't had the time to finish it up and install it. Ill take some pics of the rotors and post them, and the shaft is good he just packed it so the pulley got hammered. The intercooler is rough looking and that is why I said I was planning to replace it but it is mechanically sound ie: hold water and bolt up.
#9
ELEKTRO-FIDE Moderator
Join Date: Jul 2006
Location: In Geo-synchronous orbit over redass' bathroom,
Posts: 2,356
think you could post about the person you bought this from in the feedback thread? no bashing just an explanation of what happened.
thank you for being honest and providing so many great pics.
and thank you and Lupo for serving. hopefully this new incident in korea calms down by the time you get there.
thank you for being honest and providing so many great pics.
and thank you and Lupo for serving. hopefully this new incident in korea calms down by the time you get there.
#10
I have the same full kit, and in an effort to help a possible buyer get what is needed for a full install, I've listed what I have that is missing that you'd need to install the kit.
Based on the pictures, here's what's missing, from what I can tell:
- the BPV valve assembly vacuum solenoid (part of the unit is there, but the vacuum control part is missing), gasket, and the blue silicon hose and clamps to connect it to the manifold (you can get this direct from KB)
- the IAT sensor (shown broken off in manifold the 8'th picture)
- the adapter that connects the intake plastic pipe to the throttle body, and the couplers and clamps needed to connect it
- the BEC relocation bracket (I have this if you need it)
- the front ic unit mounting brackets (the black ic unit is shown, but you need brackets to mount it to the car; I have an extra set of these brackets that I didnt use)
- windshield washer fluid tank and mounting bracket, and hose for extending the fluid line.
- the intercooler pump, but you can buy the lightning i/c pump as a good upgrade
- all the intercooler hoses and clamps
- vacuum hoses
- valve cover breather hoses (for each side; one goes to the intake adapter that isn't shown or is missing, the other goes to the fitting above where the BPV would be)
- fuel rail hose
- the 3 hose-barb fittings missing from the blower unit (you can see the empty holes where they go, 2 are 90* brass npt/hose ****** fittings, and 1 is a straight 1/4"npt male to 1/2" hose barb fitting
- MAF connector plug and extension wiring
- intercooler pump relay and wiring
- boost-a-pump (and relay and wiring) for increased fuel supply capacity
- tune
It was mentioned the pulley is bent.
I have various sized pulleys for this blower (for different boost), and a new belt as well, all for sale.
You also need a copy of the installation instructions book if not included (it really is about 1" thick).
That's most of what's needed from what I can tell and remember. May be a few other misc. items, but those should be the biggies.
Based on the pictures, here's what's missing, from what I can tell:
- the BPV valve assembly vacuum solenoid (part of the unit is there, but the vacuum control part is missing), gasket, and the blue silicon hose and clamps to connect it to the manifold (you can get this direct from KB)
- the IAT sensor (shown broken off in manifold the 8'th picture)
- the adapter that connects the intake plastic pipe to the throttle body, and the couplers and clamps needed to connect it
- the BEC relocation bracket (I have this if you need it)
- the front ic unit mounting brackets (the black ic unit is shown, but you need brackets to mount it to the car; I have an extra set of these brackets that I didnt use)
- windshield washer fluid tank and mounting bracket, and hose for extending the fluid line.
- the intercooler pump, but you can buy the lightning i/c pump as a good upgrade
- all the intercooler hoses and clamps
- vacuum hoses
- valve cover breather hoses (for each side; one goes to the intake adapter that isn't shown or is missing, the other goes to the fitting above where the BPV would be)
- fuel rail hose
- the 3 hose-barb fittings missing from the blower unit (you can see the empty holes where they go, 2 are 90* brass npt/hose ****** fittings, and 1 is a straight 1/4"npt male to 1/2" hose barb fitting
- MAF connector plug and extension wiring
- intercooler pump relay and wiring
- boost-a-pump (and relay and wiring) for increased fuel supply capacity
- tune
It was mentioned the pulley is bent.
I have various sized pulleys for this blower (for different boost), and a new belt as well, all for sale.
You also need a copy of the installation instructions book if not included (it really is about 1" thick).
That's most of what's needed from what I can tell and remember. May be a few other misc. items, but those should be the biggies.
Last edited by tx_zstang; 11-25-2010 at 01:10 AM.