OEM BREMBO-PACKAGE WHEELS/TIRES FROM 2011 5.0 GT / GOOD RUBBER
05-26-2011, 10:51 PM
#21
3rd Gear Member
Join Date: Apr 2010
Location: Florida
Posts: 511
Category: Wheels & Tires
Price: $195
Private or Vendor Listing: Private Listing
Part fits: S197
Location (State/Prov): TX
Item Condition: Used
05-28-2011, 08:17 AM
#22
Join Date: Jan 2011
Location: Georgia
Posts: 22
Got my wheel and tire from AKElroy. Wheel and tire are almost perfect.
Thanks a lot for the sale, I can now go on vacation next month and have a spare with me.
Thanks a lot for the sale, I can now go on vacation next month and have a spare with me.
05-29-2011, 08:11 PM
#23
1st Gear Member
Thread Starter
Join Date: Dec 2010
Location: Texas
Posts: 119
2 still available. Both are perfect; the scratched wheel in the original post is now my spare. The mustang center caps are included; they will not fit my new AR wheels.
06-01-2011, 06:51 AM
#25
Join Date: May 2011
Location: british columbia canada
Posts: 34
it will, but you will have to deflate the tire until it fits, so don't toss the emergency air compressor. because of the width it will sit almost 2 inches higher than the trunk floor, so there will be a slight hump when you cover it up. i bought an emergency jack and tools from ebay and the anchor is too short because it was meant for much narrower emergency spare, so i had to modify it with a chain link to make it work.
06-01-2011, 09:29 AM
#26
1st Gear Member
Thread Starter
Join Date: Dec 2010
Location: Texas
Posts: 119
I tried it last night, and as the previous post states it fits, but tightly. I did not have to deflate mine to get it to go, but it was very snug & a few punches were needed to force it home. Getting it back out also required some wrestling from my old-man frame. Hey--at least it won't rattle!
Last edited by AKElroy; 06-01-2011 at 09:34 AM.
06-01-2011, 09:56 AM
#27
Join Date: May 2011
Location: british columbia canada
Posts: 34
I tried it last night, and as the previous post states it fits, but tightly. I did not have to deflate mine to get it to go, but it was very snug & a few punches were needed to force it home. Getting it back out also required some wrestling from my old-man frame. Hey--at least it won't rattle!
the reason i decided to make the hook work was because i went over a bad railroad crossing and i heard it bounce out of the wheelwell, pulled over and sure enough it was sitting crooked. or maybe i should inflate it back up again so that it's tight again in the well.
oh, and use a piece of carpet or something to cover the face of the wheel. i did not and now the wood panel for the carpeted floor has made a worn spot on one of the spokes. fail.
06-03-2011, 07:13 AM
#29
1st Gear Member
Thread Starter
Join Date: Dec 2010
Location: Texas
Posts: 119
$200ftf or $275 shipped
06-04-2011, 07:28 AM
#30
1st Gear Member
Thread Starter
Join Date: Dec 2010
Location: Texas
Posts: 119
Still have two -- Center caps included; I ship through UPS & let them professionaly wrap the wheel for shipping. If you have a brembo car, YOU DO NOT HAVE AN OEM SPARE. BTT!