Delphi 42 lb. Fuel Injectors
12-16-2013, 05:12 PM
#1
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
Delphi 42 lb. Fuel Injectors
Category: Engine - Intake/Fuel
Price: $100
Private or Vendor Listing: Private Listing
Location (State/Prov): VA
Item Condition: Used
Delphi / Lucas
42 lb / hr. '009' Disc Injectors
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Dynamic Flow Rate: 9.96 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 15.9 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Additional Information:
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.
Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
- The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no - deposits or clogging can occur.
- Compatible with alternative fuels (i.e. Methanol)
- Longer service life
- High-speed disc action allows wider dynamic flow range for improved idling
- Quieter operation
- Revolutionary disc design resists build up deposits which can affect fuel flow.
- No Fuel leakage for quicker starts
Last edited by cepowers18; 02-03-2014 at 02:56 PM. Reason: Price reduction
01-06-2014, 10:27 AM
#2
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
*Bump* Price reduced to $150 or best offer.
02-03-2014, 02:58 PM
#3
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
*Bump* Price reduced to $100.
03-19-2014, 03:23 PM
#4
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
*Bump*
03-27-2014, 02:41 PM
#5
Join Date: Jun 2009
Location: PA
Posts: 4
Interested in the injectors... still for sale?
04-01-2014, 08:32 AM
#6
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
darrylbush - PM sent.
04-14-2014, 08:23 AM
#7
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
The injectors are still available.
06-01-2014, 09:00 PM
#8
Join Date: Apr 2014
Location: NC
Posts: 5
Hey man do you still have the injectors?
06-02-2014, 12:39 PM
#9
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
wrhmustangman - PM sent.
06-09-2014, 02:43 PM
#10
3rd Gear Member
Thread Starter
Join Date: May 2004
Location: Richmond, VA
Posts: 614
The injectors are still available.