Boost cooler is in!
05-16-2006, 01:44 AM
#21
5th Gear Member
Join Date: Mar 2005
Location: Nashville/Knoxville, Tennessee
Posts: 4,687
RE: Boost cooler is in!
ok, im intrested. 
how much do these kits cost? would you recommend one to me since im pushing already so close to the limit of the motor? would it be more dangerous to the motor or safer.. i would think safer since the boost is cooler so less chance of detonation....
how much do these kits cost? would you recommend one to me since im pushing already so close to the limit of the motor? would it be more dangerous to the motor or safer.. i would think safer since the boost is cooler so less chance of detonation....
05-16-2006, 09:19 AM
#23
Retired MF Moderator
Thread Starter
Join Date: Aug 2004
Posts: 14,891
RE: Boost cooler is in!
i dunno man. they put a boost cooler on a cooled blown fox and it got over 100RWHP from it. the car was putting down over 600 to the wheels. 500+ on a stock bottom end for a 4.6 is playing with fire.
05-24-2006, 08:03 PM
#24
Retired MF Moderator
Thread Starter
Join Date: Aug 2004
Posts: 14,891
RE: Boost cooler is in!
nothing like a nice clean install. the pump and safe injection is mounting below everything behind the tire. like under the resevoir basically. can't see anything! you can see the nozzle in the second pic. this thing hauls some serious **** now.
http://nanaki.realns.com/images/3.JPG
http://nanaki.realns.com/images/4.JPG
http://nanaki.realns.com/images/3.JPG
http://nanaki.realns.com/images/4.JPG
05-24-2006, 09:10 PM
#25
5th Gear Member
Join Date: Mar 2005
Location:
Posts: 3,534
RE: Boost cooler is in!
ORIGINAL: nanaki
nothing like a nice clean install. the pump and safe injection is mounting below everything behind the tire. like under the resevoir basically. can't see anything! you can see the nozzle in the second pic. this thing hauls some serious **** now.
http://nanaki.realns.com/images/3.JPG
http://nanaki.realns.com/images/4.JPG
nothing like a nice clean install. the pump and safe injection is mounting below everything behind the tire. like under the resevoir basically. can't see anything! you can see the nozzle in the second pic. this thing hauls some serious **** now.
http://nanaki.realns.com/images/3.JPG
http://nanaki.realns.com/images/4.JPG
05-24-2006, 09:12 PM
#26
Retired MF Moderator
Thread Starter
Join Date: Aug 2004
Posts: 14,891
RE: Boost cooler is in!
yeah i know. i was looking at that and am actually thinking about going out there with a sponge and water and going to town.
it reads how much boost is being produced and starts spraying water/methanol once it hits 3psi+.
it reads how much boost is being produced and starts spraying water/methanol once it hits 3psi+.
05-24-2006, 11:25 PM
#27
The Rogue Mod
Join Date: Feb 2006
Location: Maryland Sucka's!!
Posts: 21,918
RE: Boost cooler is in!
ORIGINAL: nanaki
The shop called me and let me know good news and bad news about the install and tune. Good news is, i went from 360RWHP to 407RWHP. The bad news is the safety box for it is leaking. So whenever I actually go into boost and it kicks on, it's going to leak when I let off. I called snow performance and they're going to replace it. I'm going to pick my car up tomorrow. Can't wait!
The shop called me and let me know good news and bad news about the install and tune. Good news is, i went from 360RWHP to 407RWHP. The bad news is the safety box for it is leaking. So whenever I actually go into boost and it kicks on, it's going to leak when I let off. I called snow performance and they're going to replace it. I'm going to pick my car up tomorrow. Can't wait!
05-24-2006, 11:32 PM
#28
Retired MF Moderator
Thread Starter
Join Date: Aug 2004
Posts: 14,891
05-25-2006, 12:08 AM
#30
The Rogue Mod
Join Date: Feb 2006
Location: Maryland Sucka's!!
Posts: 21,918
RE: Boost cooler is in!