From Non Intercooled to Intercooled?? About HP/ TQ

Reply Subscribe

Thread Tools

Search this Thread

06-20-2010, 09:44 PM

Psustu

1st Gear Member

Thread Starter

Join Date: May 2009

Location: Delaware

Posts: 80

From Non Intercooled to Intercooled?? About HP/ TQ

I am going intercooled. I bought a FMIC 32X12X3, a Mini Race Blowoff valve, and a 3..125 pulley... Non intercooled with the V3 si I made 357 Hp and 356 Trq..at 9.89 lbs boost... What kind of power will I be getting now with the Timing, and Fuel changes.. Thanks

06-20-2010, 09:45 PM

Psustu

1st Gear Member

Thread Starter

Join Date: May 2009

Location: Delaware

Posts: 80

Is there a Gauge that reads Intake air Temps? where can I find it?

Thanks Stu

06-20-2010, 10:15 PM

luckythirteen13

6th Gear Member

Join Date: May 2004

Location: las vegas, nv

Posts: 9,092

what was your intake temps non cooled? rule of thumb is 1hp per 10* drop in temp. but if your going to add boost or retune with timing youll pick up more.

06-20-2010, 10:45 PM

Soldier GT

6th Gear Member

Join Date: Aug 2007

Location: MO/ Born and raised in Louisiana

Posts: 10,696

Quote:

Originally Posted by Psustu

Hey man what mods do you have?

06-21-2010, 03:09 PM

Psustu

1st Gear Member

Thread Starter

Join Date: May 2009

Location: Delaware

Posts: 80

Here are my mods..

Engine/Drivetrain Modifications:
Vortech V3 Si
Anderson Power Pipe
90mm SCT Mass Air
42 Lb Inj
3.73
Mac Prochamber
Flowmaster American Thunder
KB Boost a Pump
C&L Upper Plenum
BBK 75 mm TB
Focus 255 fuel pump

Suspension Modifications:
KYB Gas A Just Shocks and Struts
Eibach Pro Rate Springs
BBK Caster Camber Plates

Wheels/Tires Modifications:
Saleen Body KIt Rims Tires

Nitto 555 R

255 40 18
285 35 18

Interior/Exterior Modifications:
2 12 Rockfprd Power Series
2 Rockford 750 AMPs
2 500 RP Caps
1 550 RF 4 channel
4 Rockford 6 1/2 mids