Pipes, Boost & JuiceTalk about Exhaust, Nitrous, Blowers, Turbos, Superchargers... whatever makes you go faster! Sponsored by CARiD
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I need some help... I have a 95' 5.0 with a vortech v2 6-7lb boost, FMU, vortech BTM, trex fuel pump, stock 19lb injectors. It seems when going into boost, at or around 3500-3700 rpm range i start getting a little cut out... possibly detonation?
I am not sure, i have my initial timing set at 5* with spout removed.
I have my BTM set at about 1-3/4.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
your spark plug gap is probably to wide and your getting the spark blown out. I had this issue on a turbo car.
__________________ ENGINE363 fully forged dart engine on the way with more spray!TRANNY C4 with trans brake, 3800 stall, 9in. raceconverter, hurst shifter REAR Moser 35 spline kit with spool, FRPP 3.73 gearsSUSPENION UPR pro street Uppers & lower control arms, Strange 10 way dampers, coilovers up front, BBK sub frame connectors, UPR Tube K-member & Afirstname.lastname@example.org (OLD 5.0) 2011 CamaroSS email@example.com
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor