!ATTENTION! Nitrous Owner
#1
!ATTENTION! Nitrous Owner
Ok i've decided to go ahead and get a nitrous setup for my mustang.The one i chose to get is the EDELBROCK EDL-70001 from summit.My questions are how detailed exactly are the instructions that come with the nitrous setup?How much of a pain in the *** is this going to be to install (CARBED SETUP)?How easy is it to get things all screwed up?Does anyone have any tips or tricks they like to use or do to insure that everything is setup properly?</P>
</P>
Im very compitent and i know my way around an engine and especially this one since i built it.I dont think ill have any real problems as long as the instructions are straight foward and detailed.But im a bit cautious considering this motor just hit 5,500 miles before i stored her.And to be honest i dont really have the money to rebuild it again right now.</P>
</P>
Anyone with REAL experiences installing and using nitrous please drop me a line im wanting to do as much homework on this as i possibly can so that i make NO mistakes!</P>
Thanks in advance.</P>
#2
!ATTENTION! Nitrous Owner
i have 2 carb nos set ups ,,if you priv mess, me and we can talk about your set up its not hard to install ,,depending on h.p. to be used??you may have to run an additional pump,let me know your make in model and we will go from there,, i have nos cheater kit150/250,,,and a fogger kit,200/500.
Thread
Thread Starter
Forum
Replies
Last Post
lincolnshibuya
V6 (1994-2004) Mustangs
9
12-08-2015 04:37 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM