NeoTokyo

Hey guys;</P>


Im looking for a supercharger or turbo that can put out more then 20psi and will remain under the stock hood. I know eaton makes some really great under the hood superchargers, but with pully mods are any of their superchargers able to peak 20psi?</P>


I also know that T3T4's have a general max output of 22psi and can be modded to 32psi. But what is the best turbo charger to push that much and create the most power and maintain high reliability.</P>


Any cam suggestions for both applications? Also I know nothing about the timing curves and would really like some information on that. I know that I need really low compression for the Superchargers or turbochargers, but I have that covered with some quench headwork and water injection.</P>


Thanks guys.</P>


</P>


-Neo-</P>

N2OJunkie

.............."Im looking for a supercharger or turbo that can put out more then 20psi and will remain under the stock hood. I know eaton makes some really great under the hood superchargers, but with pully mods are any of their superchargers able to peak 20psi?"</P>


</P>


More than 20 psi under the stock hood?...................of a Vsick (or even a stock V8?)....you'l be blowing into pieces,I can tell you know nothing about cars...</P>

NeoTokyo

Heh, your a funny one, from everything i have seen you post.... You think you know it all but you just make yourself look stupid....</P>


Once again....</P>


You really have no clue of what im doing to this car.</P>

jeep45238

If you have the cash to modify your motor to take that kind of abuse, be warned that it won't be reliable and streetability will blow.

In otherwords, give an engine builder a blank check and enjoy the rewards, just don't claim it as your car<img border="0" src=smileys/smiley2.gif border="0">

hotrodman

v6 that cool sleeper move...

NeoTokyo

Here is a link that I have been looking at. A friend of mine at www.autobadges.com whom makes the 232 and other mustang badges refered this link to me.</P>


I think the IMRC w/ Split ports is hella cool. It offers ALOT of potential, just look at the flow those sons of beechez can handle. Only prob I have is that its not completly under the hood, but I am sure that I can take care of that and make some minor fabrications to my stock hook to make it still look relativly stock, but be able to house the whole intake system... NOW THATS A CHANGE! Someones Intake manifold parts stickin out of their hood as compaired to a huge supercharger! LOL</P>


Those splitport heads exist on 99-2001 Mustangs as far as I know, after that I will just find the Intake runners/IMRCs for it. Do a little pollishing on the runners to make it pretty. </P>


I was looking at a stroker site the other night and they had some cranks on there that could stroke your 3.8L block out to a 4.6L block..... I wonder what kind of pan and block clearance is needed..... I dont really know about boreing the block out, because once again I dont know how safely I can punch the cylenders out, I would hate to hit a water jacket. Im going to do some more research on that later today.</P>


cya guys.</P>


</P>


-Neo-</P>

N2OJunkie

</P>


yeah, yeh whatever you said smartypants....why dont you get areal Stang with the kind of money you are planning on spending....</P>


</P>


Ok, I did...now stop bulls**tting thisfforum</P>


</P><edited><editID>NO2JUNKIE</editID><editDate>38022.8865162037</editDate></edited>

NeoTokyo

I really suggest that you remove my picture from this forum. Do your really want to see how much right I have to it being a picture of me and having a copywright in it? Reguardless of what you think about "Pictures of the internet become public property" there are copowrights for a reason. Just like if you post a picture on ebay, that picture then gets a nice watermark from Ebay Motors signifying it as their own picture, thus becoming their property, read through their contract sometime. </P>


Now, kindly remove my picture, because it may not be directly blunt, but your post of it is slander, and i dont appriciate that much. </P>

T5superduty

</P>


</P>


LOL</P>

NeoTokyo

Well at least from people looking at my pic, no one will call me a pu$$y... LOL <edited><editID>NeoTokyo</editID><editDate>38022.1380671296</editDate></edited>