Strokednforged

Awesome what u running?

Strokednforged

I believe my pics r on page 2 of this thread? They're posted tho lol! Got a 306 stroked out, all forged internals, scat crank, Manley rods, trick flow ts heads, bm headers, 12lb, vortech, BBk fuel pressure reg, 48lb injectors, BBk fuel rails, acell full engine management system, live wires, edlebrock lower, victor jr series upper, trick flow oil catch, coolant catch, battery delet- trunk mounted, ac delet, smog delete, race fuel valve shutoff behind license plate, every kind of aftermarket gauge inside I.e. tri-pods, boost, fuel, oil, air/fuel mix, monster tack w/shift lights, forget cam size/lobe duration? E 303 or z cam not 100%? There's really not much under the hood that can b done except an after/inter cooler or meth injection maybe? Or upgrade vortec swap impeller? Or of course A BIG BLOCK SWAP? ( MY PICS SHOW A GOOD PORTION OF THE MODS STATED)

Strokednforged

Check out page 2 should b so,e pics of my ride! I replied to sum1 with mods info as well. Basically easier to see half the mods in pics but internals r all forged, scat, Manley, Keith black, domed dished, tf turbo swirl heads, headers fuel regs, maf upgrade, 48lb injectors, BBk headers, 7qt racing oil pan/canton, tremec t56 tranny upgrade, subframe connectors, battle box brace, aluminum drive shaft, recent ford racing clutch cable n aluminum quadrant install, drag struts n shocks, ford 9inch rear, 373 gear swap, upper n lower controls BBk,braided n copper lines, hurst line locker, JUST SOO MANY MODS TOO LIST BRO!! Please check out my pics thanks!!! STROKED N FORGED!!!

Strokednforged

SORRY DIDN'T KNOW I WAS NOMINATED FOR A WEEK LOL! Just posted pics on page 2 of this thread plus replied with additional mods/upgrades to other members WAY TOO MANY MODS TO POST BUT I COVERED MANY THANKS AGAIN,STROKEDnforged

Strokednforged

I think m gonna post a video or 2? Love to share the sound of my beast with y'all, nothing like that throaty stang sound coupled with the sweet whistling sound of a supercharger!!! MAYBE LAY DOWN SOME RUBBER FOR U ALL AS WELL?

nastynotch483

331 dart T.E.A heads VORTECH YSI OFF THE 2010 EFI renegade champion Chris vangilder car 10 point cage Bear brakes current set ups spins north of 27 pounds boost

Strokednforged

Yeah I got hella mods myself(posted many of them) truth is just so many rather take pics of everything lol! Minus internals of course since no one can really see them lol. My boost is around 18-22 my gauge has been loopy lately, need to get in n tune it again n maybe a new boost gauge? I misplaced my data cable so I can't get on my laptop till I replace the cord or find it GRrr. Nice car enjoy. It's getting cold out in my parts gonna havta put her up for the season soon :-( b safe n burn em regularly, Strokednforged!!!

9redfox3

Car is really nice like what u did with it and nastynotch483 that car sounds amazing ! Going to be tough to beat AlmostStock that car is polished from top too bottom alot of TLC in that ride.. What nobody like convertibles both very nice clean rides? All these foxes deserve ROTM .....

Strokednforged

Thanks man compliments r much appreciated!!!

ALMOST STOCK

Glad to accommodate.






















MODS

ENGINE
Balanced/Blue Printed 306
TRW Forged Pistons
Ported Tubular GT-40 Intake
Heads ported, bowl blended & 5-angle valve job with e7's 1.94/1.6 valves
Crane 2030Cam w/rocker arm conversion
JBA 1-5/8” Headers
Romac 50oz. Aluminum/Steel Balancer

TRANSMISSION T5
Steeda Tri Ax Shifter w/Quadrant & Adjustable Cable

MISC
MSD 8.5mm plug wires
MAC fender well cold air kit
March Performance Power and Amp Underdrive Pulleys
March Performance A/C, Power Steering, and Tensioner Covers
Borla Catback Exhaust
Magnaflow Tru X 2.5" stainless steel exhaust
Cervini Stalker Bumper Cover

SUPENSION
H&R Sport Springs
Bilstein Struts & Shocks
Baer Bump Steer Kit
MM Chrome STB
MM Chrome CC Plates
MM Aluminum Panhard Bar
MM Lower Control Arms
MM Sub Frame Connectors
MM 4 Point K Member Brace
Ford Upper Control Arms
FMS 3.55 Gears
Urethane Bushings
TA Diff Cover
FMS Aluminum Driveshaft
17x9 SSR Integrals Wheels
Bridgestone Potenza RE730 245 X 40 X 17


BRAKES
5 Lug Conversion
Baer Track….. Front 13”
Baer Touring.. Rear 12”
Slotted and Crossed-Drilled Rotors