You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
here is what the kit looks like , and this what I will get .
Parts are made of high-pressure injection molded, O.E. quality urethane. 4pc. kit includes front air dam, side skirt set and rear lower skirt available for single exhaust or dual exhaust. Available pre-painted in factory colors. 100% color match guarantee! Paint quality better than factory! Instructions and all needed hardware included.
well I need something I can install (newbie ) , don't have to change the bumpers out ,
I'm just looking to enhance my ride not do a complete transformation . I am open to any suggestions because I do have to work on budget .
here is my stang :
Last edited by bigdaddy51200; 10-11-2009 at 09:22 AM.
For about the same price, you could get a GT take-off front fascia and side skirts ($520) that are available in Torch Red and order a new GT/CS rear fascia (~$350) and have it painted.
__________________
Mods: Edelbrock Supercharger 422RWHP/394RWTQ, CDC convertible bar & Classic Chin, Roush rear springs, GTAs, Steeda Billet LCAs & adj. panhard, CHE anti-squat, Pro5.0 shifter with Hurst stick/knob, RotorPro Rotors, Agent 47 mirrors, Dual Aeroforce gauges, CS69 wheels
For about the same price, you could get a GT take-off front fascia and side skirts ($520) that are available in Torch Red and order a new GT/CS rear fascia (~$350) and have it painted.
I am a total newbie at this . This is why I come here
I used to have this kit on my GT (minus the chin spoiler) It looks a lot better than those pictures show.
If you go with a GT bumper, the rear bumper removal on this car is a bit of a pain, but not too terrible. Remember too that a GT bumper has 2 cutouts for exhaust, and your car only has one tailpipe. You would need to deal with that.
Make sure to clean the parts and the car very very well with pure alcohol, and then you MUST use 3M adhesion promoter (on both the part AND the car). Mine came with the promoter, but if you don't get any, make sure to get some. DO NOT SKIP THAT STEP or your parts will not stay on forever.
Here is a pick of my car with that kit:
__________________
Bucephalus
'07 Alloy Metallic Mustang GT
Brenspeed JLT CAI
Eibach Pro kit
20" Silver Foose Nitrous Wheels
Motive 4.10s
I used to have this kit on my GT (minus the chin spoiler) It looks a lot better than those pictures show.
If you go with a GT bumper, the rear bumper removal on this car is a bit of a pain, but not too terrible. Remember too that a GT bumper has 2 cutouts for exhaust, and your car only has one tailpipe. You would need to deal with that.
Make sure to clean the parts and the car very very well with pure alcohol, and then you MUST use 3M adhesion promoter (on both the part AND the car). Mine came with the promoter, but if you don't get any, make sure to get some. DO NOT SKIP THAT STEP or your parts will not stay on forever.
Here is a pick of my car with that kit:
That does look very good on yours !!! Thanks for the tip promoter.
Do you have a pic of the rear by chance ??
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
3DCARBON 4PC. V6 BODY KIT , any thoughts ??
